DIME - Test Summary

Summary for Test 2015-04-10-7-7

Test performed: ASTM D4791-10

Project Identifiers	Project ID: 209866 DEA: 043G7604 EFIS: 0412000170
DIST-CO-RTE-PM	04-NAP-128-20.2
Award Date	12/18/2014
Closeout Date	12/14/2017
Work Description	INSTALL HORIZONTAL DRAINS, SLOPE INDICATORS, AND HIGHWAY PLANTING.
Location Description	NAPA COUNTY NEAR CAPELL CREEK BRIDGE
QA Service Level	1 (Verified on 04/25/2016)

Sample Taken Date	04/10/2015	Sample Unique Key	7
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/15/2015
Sample type	Verification	A brief description of the sample	3/4 HMA
The quantity of what the sample constitutes	1 bag	From where was the sample collected	Source
First name of sampler or witnessed by	Noel	Last name of sampler or witnessed by	Aquino
Title of sampler	Unknown	Telephone number of sampler	Unknown
Laboratory sample identification	15ASPH-0198 thru 15ASPH-0203	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Syar Lake Herman	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Type	Job Mix Formula Partial	Source Identification (SMARA, name of Pit or Job Site)	91-48-0002
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Stockpile
Where the material sample would have been placed if not sampled	Unknown	Superpave or Non-superpave Mix	Not set

DIME Sample ID: 2015-04-10-7

DIME Test ID: 2015-04-10-7-7

Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory

Test Method: ASTM D4791-10: Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Flat and Elongated Particles)

Test Release Date: 2015-05-06

How is the aggregated being tested?: By mass

What test method is being used?: Method B

Input Type: Calculated

Tester's full name: Thomas Stinnett

Date of test: 04/30/2015

Dimensional ratio used: 5.1

Percent (by mass) flat and elongated particles on the 3 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 3 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 2 1/2 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 2 1/2 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 2 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 2 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 1 1/2 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 1 1/2 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 1 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 1 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 3/4 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 3/4 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 1/2 in. sieve: 100 %

Percent (by mass) not flat and not elongated particles on the 1/2 in. sieve: 100 %

Percent (by mass) flat and elongated particles on the 3/8 in. sieve: 0.6 %

Percent (by mass) not flat and not elongated particles on the 3/8 in. sieve: 0.6 %

Percent (by mass) flat and elongated particles on the #4 sieve: 0.1 %

Percent (by mass) not flat and not elongated particles on the #4 sieve: 0.1 %

Flat and elongated particles weighted average: no data

Not flat and elongated particles weighted average: no data

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/6/2015 ✔