Test 2015-04-14-9-8 (ASTM D4791-10) Summary

Project Information
Project IdentifiersProject ID: 209866
DEA: 043G7604
EFIS: 0412000170
DIST-CO-RTE-PM04-NAP-128-20.2
Work DescriptionINSTALL HORIZONTAL DRAINS, SLOPE INDICATORS, AND HIGHWAY PLANTING.
Location DescriptionNAPA COUNTY NEAR CAPELL CREEK BRIDGE
Sample Information
Sample Taken Date4/14/2015 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing4/15/2015
Sample typeVerification A brief description of the sampleJMF Verification
The quantity of what the sample constitutes9 bags From where was the sample collectedSource
First name of sampler or witnessed byJoy Last name of sampler or witnessed bySharma
Title of samplerUnknown Laboratory sample identificationUnknown
The fabricator/manufacturer/facility nameSyar Lake Herman Transportation Laboratory (TL) NumberC871726 thru C871731
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)NA
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedStockpile at plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size
The concrete mix design number Lot numberNot set
Sublot numberNot set JMF Verification ID
Test Details
DIME Sample ID: 2015-04-14-9
DIME Test ID: 2015-04-14-9-8
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: ASTM D4791-10: Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Flat and Elongated Particles)
Test Release Date: 2015-05-06
Test Results

How is the aggregated being tested?: By mass
What test method is being used?: Method B
Input Type: Calculated
Tester's full name: Thomas Stinnett
Date of test: 04/21/2015
Dimensional ratio used: 5.1
Percent (by mass) flat and elongated particles on the 3 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 3 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 2 1/2 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 2 1/2 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 2 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 2 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 1 1/2 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 1 1/2 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 1 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 1 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 3/4 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 3/4 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 1/2 in. sieve:0 %
Percent (by mass) not flat and not elongated particles on the 1/2 in. sieve:0 %
Percent (by mass) flat and elongated particles on the 3/8 in. sieve:0.8 %
Percent (by mass) not flat and not elongated particles on the 3/8 in. sieve:0.8 %
Percent (by mass) flat and elongated particles on the #4 sieve:0.6 %
Percent (by mass) not flat and not elongated particles on the #4 sieve:0.6 %
Flat and elongated particles weighted average:no data
Not flat and elongated particles weighted average:no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 05/06/2015