Print Report | Back to Sample Detail

Sample Record for 2020-11-18-20

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214601 DEA: 041J5694 EFIS: 0419000313 QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-101-0.0/21.8
Work Description: San Mateo US 101 Express Lanes North
Location Description:
Contractor Name: KIEWIT INFRASTRUCTURE COMPANY
Contractor Address: 1301 SHOREWAY RD, SUITE 275, BELMONT, CA 94402
Resident Engineer: Douglas Inori Structure Rep.: Tyler Pinell

Sample Information

DIME Sample ID: 2020-11-18-20
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 11/18/2020
Date that the sample was received by the laboratory/organization performing the testing: 11/24/2020
The quantity of what the sample constitutes: 28
A brief description of the sample: A325 Bolt Assemblies
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Nucor Unytite

Material Information

Rocap Number(s):
Heat Number(s): NF15103239 100201802 100201805 100898066 6213796404 NF15201353 DL19105173 75070238
Nut Mfg. Lot Number(s): 431190A 27724-75070238
Washer Mfg. Lot Number(s): 317500 D4382
Bolt Specification: A325
Bolt Length(s): 1.25" 2" 2.25" 2.5" 4" 4.25"
Nut Specification: A563
Washer Specification: F436
Finish: MG
Diameter/Size: .5" .75" 1.5"
Bolt Mfg. Lot Number: 368068A 430804A 430807A 427929B 21412-
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 54

DIME Test ID: 2020-11-18-20-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 12/09/2020
Date Tested: 12/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A563
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
5A27724-75070238216692A563fsaylor
UTM 450kip
Temperature 72 f

Test 2 of 54

DIME Test ID: 2020-11-18-20-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 12/09/2020
Date Tested: 12/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A563
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
2A431190A52891A563fsaylor
UTM 450kip
Temperature 72 f

Test 3 of 54

DIME Test ID: 2020-11-18-20-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 12/09/2020
Date Tested: 12/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
4A427929B0.750048374215.1810.00A325fsaylor
UTM 450kip
Temperature no data

Test 4 of 54

DIME Test ID: 2020-11-18-20-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 368068A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size .5 in
Bolt Length 1.25 in
Gage Type Pass

Test 5 of 54

DIME Test ID: 2020-11-18-20-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430804A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Gage Type Pass

Test 6 of 54

DIME Test ID: 2020-11-18-20-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Gage Type Pass

Test 7 of 54

DIME Test ID: 2020-11-18-20-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Gage Type Pass

Test 8 of 54

DIME Test ID: 2020-11-18-20-8
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Gage Type Pass

Test 9 of 54

DIME Test ID: 2020-11-18-20-9
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 427929B
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.5 in
Gage Type Pass

Test 10 of 54

DIME Test ID: 2020-11-18-20-10
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Gage Type Pass

Test 11 of 54

DIME Test ID: 2020-11-18-20-11
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Gage Type Pass

Test 12 of 54

DIME Test ID: 2020-11-18-20-12
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 431190A
Finish Coating ASTM B695 - Mech Galv
Product Markings DH N
Size .75 in
Gage Type Pass

Test 13 of 54

DIME Test ID: 2020-11-18-20-13
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 431190A
Finish Coating ASTM B695 - Mech Galv
Product Markings DH N
Size .75 in
Gage Type Pass

Test 14 of 54

DIME Test ID: 2020-11-18-20-14
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 431190A
Finish Coating ASTM B695 - Mech Galv
Product Markings DH N
Size .75 in
Gage Type Pass

Test 15 of 54

DIME Test ID: 2020-11-18-20-15
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 27724-75070238
Finish Coating ASTM B695 - Mech Galv
Product Markings DH U
Size 1.5 in
Gage Type Pass

Test 16 of 54

DIME Test ID: 2020-11-18-20-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 368068A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size .5 in
Bolt Length 1.25 in
Measurement Average 2.9 mils

Test 17 of 54

DIME Test ID: 2020-11-18-20-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430804A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Measurement Average 3.16 mils

Test 18 of 54

DIME Test ID: 2020-11-18-20-18
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Measurement Average 3.54 mils

Test 19 of 54

DIME Test ID: 2020-11-18-20-19
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Measurement Average 4.18 mils

Test 20 of 54

DIME Test ID: 2020-11-18-20-20
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Measurement Average 3.57 mils

Test 21 of 54

DIME Test ID: 2020-11-18-20-21
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 427929B
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.5 in
Measurement Average 3.22 mils

Test 22 of 54

DIME Test ID: 2020-11-18-20-22
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Measurement Average 2.62 mils

Test 23 of 54

DIME Test ID: 2020-11-18-20-23
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Measurement Average 4.11 mils

Test 24 of 54

DIME Test ID: 2020-11-18-20-24
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 431190A
Finish Coating ASTM B695 - Mech Galv
Product Markings DH N
Size .75 in
Bolt Length no data in
Measurement Average 4.06 mils

Test 25 of 54

DIME Test ID: 2020-11-18-20-25
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 431190A
Finish Coating ASTM B695 - Mech Galv
Product Markings DH N
Size .75 in
Bolt Length no data in
Measurement Average 4.1 mils

Test 26 of 54

DIME Test ID: 2020-11-18-20-26
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 431190A
Finish Coating ASTM B695 - Mech Galv
Product Markings DH N
Size .75 in
Bolt Length no data in
Measurement Average 3.98 mils

Test 27 of 54

DIME Test ID: 2020-11-18-20-27
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 27724-75070238
Finish Coating ASTM B695 - Mech Galv
Product Markings DH U
Size 1.5 in
Bolt Length no data in
Measurement Average 3.25 mils

Test 28 of 54

DIME Test ID: 2020-11-18-20-28
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 317500
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Measurement Average 2.74 mils

Test 29 of 54

DIME Test ID: 2020-11-18-20-29
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 317500
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Measurement Average 2.44 mils

Test 30 of 54

DIME Test ID: 2020-11-18-20-30
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 317500
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Measurement Average 2.39 mils

Test 31 of 54

DIME Test ID: 2020-11-18-20-31
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D4382
Finish Coating ASTM B695 - Mech Galv
Product Markings F436 P
Size 1.5 in
Bolt Length no data in
Measurement Average 2.47 mils

Test 32 of 54

DIME Test ID: 2020-11-18-20-32
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 368068A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size .5 in
Bolt Length 1.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.2
Spacing Ok

Test 33 of 54

DIME Test ID: 2020-11-18-20-33
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430804A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.82
Spacing Ok

Test 34 of 54

DIME Test ID: 2020-11-18-20-34
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 430807A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.37
Spacing Ok

Test 35 of 54

DIME Test ID: 2020-11-18-20-35
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Hardness Reading Scale C Scale
Hardness Reading Average 23.15
Spacing Ok

Test 36 of 54

DIME Test ID: 2020-11-18-20-36
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 22.07
Spacing Ok

Test 37 of 54

DIME Test ID: 2020-11-18-20-37
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 317500
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 42.35
Spacing Ok

Test 38 of 54

DIME Test ID: 2020-11-18-20-38
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 317500
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 42.95
Spacing Ok

Test 39 of 54

DIME Test ID: 2020-11-18-20-39
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/08/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D4382
Finish Coating ASTM B695 - Mech Galv
Product Markings F436 P
Size 1.5 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 41.3
Spacing Ok

Test 40 of 54

DIME Test ID: 2020-11-18-20-40
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Gage Type Pass

Test 41 of 54

DIME Test ID: 2020-11-18-20-41
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Gage Type Pass

Test 42 of 54

DIME Test ID: 2020-11-18-20-42
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Gage Type Pass

Test 43 of 54

DIME Test ID: 2020-11-18-20-43
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Gage Type Pass

Test 44 of 54

DIME Test ID: 2020-11-18-20-44
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Gage Type Pass

Test 45 of 54

DIME Test ID: 2020-11-18-20-45
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Measurement Average 4.19 mils

Test 46 of 54

DIME Test ID: 2020-11-18-20-46
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Measurement Average 2.96 mils

Test 47 of 54

DIME Test ID: 2020-11-18-20-47
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Measurement Average 6.06 mils

Test 48 of 54

DIME Test ID: 2020-11-18-20-48
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Measurement Average 3.55 mils

Test 49 of 54

DIME Test ID: 2020-11-18-20-49
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Measurement Average 3.87 mils

Test 50 of 54

DIME Test ID: 2020-11-18-20-50
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Hardness Reading Scale C Scale
Hardness Reading Average 24.45
Spacing Ok

Test 51 of 54

DIME Test ID: 2020-11-18-20-51
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21412-6213796404
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4 in
Hardness Reading Scale C Scale
Hardness Reading Average 25.35
Spacing Ok

Test 52 of 54

DIME Test ID: 2020-11-18-20-52
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 24.48
Spacing Ok

Test 53 of 54

DIME Test ID: 2020-11-18-20-53
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 23.26
Spacing Ok

Test 54 of 54

DIME Test ID: 2020-11-18-20-54
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/09/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 21060-NF15201353
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA
Size 1.5 in
Bolt Length 4.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 24
Spacing Ok