Print Report | Back to Sample Detail

Sample Record for 2020-11-10-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214890 DEA: 080A4414 EFIS: 0818000047 COOP: 081894 QA Service Level: 2
DIST-CO-RTE-PM: 08-RIV-I-15-17.6/19.6
Work Description: Construction consists of additional of two new lanes on Railroad Canyon Road through interchange, reconstruction of the northbound diamond ramps to hook ramps to connect to Grape Street , construction of auxiliary and deceleration lanes on I-15
Location Description: Located at City of Lake Elsinore , 1.6 Mile South to 0.4 Mile North of Railroad Canyon Road undercrossing in Riverside County, CA.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Tom Guglielmana Structure Rep.: Arvind K Patel

Sample Information

DIME Sample ID: 2020-11-10-10
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 11/10/2020
Date that the sample was received by the laboratory/organization performing the testing: 11/13/2020
The quantity of what the sample constitutes: 1
A brief description of the sample: bearing pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): 19263-1
Material/Compound/Elastomer ID: na
Samples Representing: 5
Description (size): 2.3"x14"x30"
Comments:
Description (Number of Shims): 4
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: na

Test Results

Test 1 of 4

DIME Test ID: 2020-11-10-10-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 11/24/2020
Date Tested: 11/16/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 52
Reading #2 51
Reading #3 50
Reading #4 52
Reading #5 51
Mean 51.2

Test 2 of 4

DIME Test ID: 2020-11-10-10-2
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 11/24/2020
Date Tested: 11/16/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 5
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.073
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2093.91 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.074
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2613.18 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.07
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2593.01 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Sample 4 Median Thickness 0.067
Sample 4 Thickness all Within 0.003 inch? Yes
Sample 4 Ultimate Tensile 2678.31 lbf/in^2
Sample 4 Elongation (350% Min) Pass
Sample 5 Median Thickness 0.071
Sample 5 Thickness all Within 0.003 inch? Yes
Sample 5 Ultimate Tensile 2552.56 lbf/in^2
Sample 5 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2593 lbf/in^2

Test 3 of 4

DIME Test ID: 2020-11-10-10-3
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 11/24/2020
Date Tested: 11/16/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.066
Sample 1 Tear Strength 240.7
Sample 2 Median Thickness 0.074
Sample 2 Tear Strength 228.4
Sample 3 Median Thickness 0.071
Sample 3 Tear Strength 251.5
Median of the Tear Strength Values 240.7 lb/in

Test 4 of 4

DIME Test ID: 2020-11-10-10-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 11/16/2020
Date Tested: 11/16/2020
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2020-11-10-10-2ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension11/16/2020Not scheduledSteven PaineCT HQ - Sacramento Structural Materials Testing Laboratory