Print Report | Back to Test Summary

Testing Report for 2020-10-29-6-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 060Q2804
EFIS: 0613000051
Project ID: 213444
QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-99,178-23.8/R28.4,0.1
Work Description: RECONSTRUCT LANES AND SHOULDERS WITH CRCP, MODIFYING ELECTRICAL SYSTEM
Location Description: KERN COUNTY IN BAKERSFIELD ON ROUTE 99 FROM 0.3 MILE SOUTH OF PALM AVENUE OVERCROSSING TO BEARDSLEY CANAL BRIDGE AND ON ROUTE 178 AT ROUTE 99/178 SEPARATION
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Hugo Camberos
Structure Rep.: Luis Melendez

Sample Information

DIME Sample ID: 2020-10-29-6
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 10/29/2020
Date that the sample was received by the laboratory/organization performing the testing: 11/3/2020
The quantity of what the sample constitutes: 1
A brief description of the sample: joint seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman

Material Information

Mfg. Lot Number(s): 1220393
Manufacturer(s): Watson Bowman
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: 2.75"

Test Information

DIME Test ID: 2020-10-29-6-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Date Tested: 11/4/2020
Verified Date: 11/9/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM: 2KIP
Temperature: 72 f
Humidity: 50 %
Spec Minimum Uncompressed Width: 2.78 in
Area (5 Times of the Height of Contact Face): 13.9675 sqin
Half of the Spec Minimum Uncompressed Width: no data
85 Percent of the Spec Minimum Uncompressed Width: 2.7935 in
3 Times of the Area: no data
4 Times of the Load at W1: no data
W1 (US Units): 2.37 in
W1 (Metric Units): 60.13 millimeters
W2 (US Units): 1.2 in
W2 (Metric Units): 30.56 millimeters
Satisfactory of MR of (US Units): 1.164 in
Satisfactory of MR of (Metric Units): 29.57 millimeters
Optional W1 Measurement 1: no data
Optional W1 Measurement 2: no data