Print Report | Back to Test Summary

Testing Report for 2020-10-21-4-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-10-21-4
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Los Angeles Field Laboratory
Sample Organization Contact: (858) 285-5797
Type of Sample: Stock
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 10/21/2020
Date that the sample was received by the laboratory/organization performing the testing: 10/23/2020
The quantity of what the sample constitutes: 48
A brief description of the sample: 2 1/2" x 42" HDG anchor bolts
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: A and M Nut and Bolt

Material Information

Rocap Number(s):
Heat Number(s): Bolt 3094713 Nut 190483 Washer 209034
Nut Mfg. Lot Number(s): DEBL
Washer Mfg. Lot Number(s): 5851
Bolt Specification: ASTM F1554-15 Gr 55-S1
Bolt Length(s): 42"
Nut Specification: ASTM A563 Gr. DH
Washer Specification: ASTM F436
Finish: HDG
Diameter/Size: 2 1/2"
Bolt Mfg. Lot Number: 50998-ppo
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Information

DIME Test ID: 2020-10-21-4-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Date Tested: 11/5/2020
Verified Date: 11/5/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Number of Samples: 1
Sample Heat Number Diameter (in) Area (sqin) Stress at Offset (psi) Tensile Strength (psi) Elongation in 4 x d (%) Tested By
2 3094713 0.507 0.202 68542 92607 26.4 fsaylor
UTM: 67kip
Temperature: 72 f