Print Report | Back to Test Summary

Testing Report for 2020-10-20-4-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081F13U4
EFIS: 0819000074
Project ID: 214775
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-62,95-122.0/142.7,9.7/33.6
Work Description: COLD-IN PLACE RECYCLING AND PLACE RHMA-G.
Location Description: SAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Khoa Nguyen Nguyen
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-10-20-4
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 10/20/2020
Date that the sample was received by the laboratory/organization performing the testing: 10/21/2020
The quantity of what the sample constitutes: 1 Bag Coldfeed Agg., 3 Bags Agg.,
A brief description of the sample: 10K MS 1/2" RHMA-G 0.5% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0626G-20
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction Co Indio

Material Information

Source Identification (SMARA or name of Pit): 91-33-0072
The fabricator's/manufacturer's product name for the sample: 1/2 RHMA-G-SP
The fabricator/manufacturer designation for the sample:
The plant number: 1346
A detailed description of where the material sample was collected: Belt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2020-10-20-4-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 10/23/2020
Verified Date: 10/30/2020
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test: Combined Coldfeed Aggregate Gradation
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: Combined Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99 %
Cumulative percent passing the 1/2 in. sieve: 88 %
Cumulative percent passing the 3/8 in. sieve: 85 %
Cumulative percent passing the #4 sieve: 42 %
Cumulative percent passing the #8 sieve: 21 %
Cumulative percent passing the #16 sieve: 15 %
Cumulative percent passing the #30 sieve: 11 %
Cumulative percent passing the #50 sieve: 8 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2.9 %