Print Report | Back to Test Summary

Testing Report for 2020-10-14-15-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081F13U4
EFIS: 0819000074
Project ID: 214775
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-62,95-122.0/142.7,9.7/33.6
Work Description: COLD-IN PLACE RECYCLING AND PLACE RHMA-G.
Location Description: SAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Khoa Nguyen Nguyen
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-10-14-15
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 10/14/2020
Date that the sample was received by the laboratory/organization performing the testing: 10/16/2020
The quantity of what the sample constitutes: 5 Bags Agg., 2 Bags of Coldfeed agg.
A brief description of the sample: 10K MS 3/4" RHMA-G-SP 1.0% Lime Slurry
From where was the sample collected: Manufacturer
Laboratory sample identification: 0608G-20
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction Company Indio

Material Information

Source Identification (SMARA or name of Pit): 91-33-0072
The fabricator's/manufacturer's product name for the sample: 3/4 RHMA-G-SP
The fabricator/manufacturer designation for the sample:
The plant number: 1557
A detailed description of where the material sample was collected: Belt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2020-10-14-15-2
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Date Tested: 10/20/2020
Verified Date: 10/26/2020
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Method: 2 - Individual Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Weighted average percentage of fractured, coarse, 2 faced particles: 100 %
Weighted average percentage of fractured, coarse, 1 faced particles: 100 %
Percentage of fractured, fine, 1 faced particles tested: 100 %