Print Report | Back to Test Summary

Testing Report for 2020-09-03-7-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081F1324
EFIS: 0815000212
Project ID: 214774
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-95-64.5/80.5
Work Description: PLACE RHMA-G, COLD PLANE AC AND REPLACE AC SURFACING.
Location Description: SAN BERNARDINO COUNTY ON ROUTE 95 FROM 0.5 MILE NORTH OF GOFFS ROAD TO NEVADA STATE LINE.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Darcy Davis
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-09-03-7
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 9/3/2020
Date that the sample was received by the laboratory/organization performing the testing: 9/4/2020
The quantity of what the sample constitutes: 10 Bags Of Aggregate
A brief description of the sample: JMF 1/2" RWMA-G-SP 0.25% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0526-20
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Bullhead City Arizona

Material Information

Source Identification (SMARA or name of Pit): CM2056
The fabricator's/manufacturer's product name for the sample: 1/2 RWMA-G-SP
The fabricator/manufacturer designation for the sample:
The plant number: 387111B
A detailed description of where the material sample was collected: Belt Cut at Bullhead City Arizona
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2020-09-03-7-2
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Date Tested: 9/9/2020
Verified Date: 9/10/2020
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Method: 2 - Individual Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Weighted average percentage of fractured, coarse, 2 faced particles: 99 %
Weighted average percentage of fractured, coarse, 1 faced particles: 100 %
Percentage of fractured, fine, 1 faced particles tested: 100 %