Print Report | Back to Test Summary

Testing Report for 2020-08-18-30-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 042640F4
EFIS: 0400020132
Project ID: 210673
QA Service Level: 1
DIST-CO-RTE-PM: 04-SON-101-4.0/7.1
Work Description: DESIGN THE NORTHERLY SEGMENT OF THE MARIN-SONOMA NARROWS PROJECT AND INCLUDES SOUND WALLS, BRIDGES, MEDIAN WIDENING AND RAMP WIDENING.
Location Description: JUST NORTH OF THE U.S. 101 AND STATE ROUTE 116 CONNECTION TO 0.3 MILE NORTH OF THE CORONA ROAD OVERCROSSING IN THE CITY OF PETALUMA.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Gina Choi
Structure Rep.: Brian Beaudoin

Sample Information

DIME Sample ID: 2020-08-18-30
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - DME / District Lab
Sample Organization Contact: (510) 507-3456
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 8/18/2020
Date that the sample was received by the laboratory/organization performing the testing:
The quantity of what the sample constitutes: 24 boxes
A brief description of the sample: Hot mix asphalt in boxes
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Bodean Mark West Quarry

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:

Test Information

DIME Test ID: 2020-08-18-30-4
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Date Tested: 8/29/2020
Verified Date: 9/2/2020
Submitted By Organization: CT D04 - DME / District Lab
Organization Address: 21339 Cabot Blvd,
Organization City: Hayward
Organization State: CA
Organization Zipcode: 94545
Organization Email: mohammad.dehghan@dot.ca.gov
Organization Phone: (510) 507-3456
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A): 15000
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B): 15000
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A): 1.54 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B): 2 mm
Stripping Inflection Point (Wheel A): 24992
Stripping Inflection Point (Wheel B): 24992