Print Report | Back to Sample Detail

Sample Record for 2020-08-20-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-08-20-11
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 08/20/2020
Date that the sample was received by the laboratory/organization performing the testing: 08/20/2020
The quantity of what the sample constitutes: 12/2191 Bolts, 12/2191 Nuts, 12/4382 Washers
A brief description of the sample: A 325 bolt Assembly
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: UIS Lindon UT

Material Information

Rocap Number(s): TT0130754
Heat Number(s): 10491790
Nut Mfg. Lot Number(s): 17-04-005
Washer Mfg. Lot Number(s): D 6057
Bolt Specification: ASTM A 325
Bolt Length(s): 3"
Nut Specification: ASTM A 563
Washer Specification: ASTM F 436
Finish: MG
Diameter/Size: 1/2"
Bolt Mfg. Lot Number: M 5187
Rocap Test Requirement(s): YES
Lubricant Requirements(s): No

Test Results

Test 1 of 32

DIME Test ID: 2020-08-20-11-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 09/02/2020
Date Tested: 08/27/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
11A17-04-00523143Nut Prooffsaylor
UTM 450kip
Temperature 72 f

Test 2 of 32

DIME Test ID: 2020-08-20-11-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 09/02/2020
Date Tested: 08/27/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
11B17-04-00523168Nut Prooffsaylor
UTM 450kip
Temperature 72 f

Test 3 of 32

DIME Test ID: 2020-08-20-11-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 09/02/2020
Date Tested: 08/27/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Bolt
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
11AM51870.50002011489.4710.00A325 Boltfsaylor
UTM 450kip
Temperature no data

Test 4 of 32

DIME Test ID: 2020-08-20-11-4
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 09/02/2020
Date Tested: 08/27/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Bolt
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
11BM51870.50002017889.7610.00A325 Boltfsaylor
UTM 450kip
Temperature no data

Test 5 of 32

DIME Test ID: 2020-08-20-11-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Gage Type Pass

Test 6 of 32

DIME Test ID: 2020-08-20-11-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Gage Type Pass

Test 7 of 32

DIME Test ID: 2020-08-20-11-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Gage Type Pass

Test 8 of 32

DIME Test ID: 2020-08-20-11-8
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Gage Type Pass

Test 9 of 32

DIME Test ID: 2020-08-20-11-9
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Gage Type Pass

Test 10 of 32

DIME Test ID: 2020-08-20-11-10
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Gage Type NA

Test 11 of 32

DIME Test ID: 2020-08-20-11-11
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Gage Type NA

Test 12 of 32

DIME Test ID: 2020-08-20-11-12
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Gage Type NA

Test 13 of 32

DIME Test ID: 2020-08-20-11-13
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Gage Type NA

Test 14 of 32

DIME Test ID: 2020-08-20-11-14
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Gage Type NA

Test 15 of 32

DIME Test ID: 2020-08-20-11-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Measurement Average 2.54 mils

Test 16 of 32

DIME Test ID: 2020-08-20-11-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Measurement Average 3.08 mils

Test 17 of 32

DIME Test ID: 2020-08-20-11-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Measurement Average 2.15 mils

Test 18 of 32

DIME Test ID: 2020-08-20-11-18
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Measurement Average 2.61 mils

Test 19 of 32

DIME Test ID: 2020-08-20-11-19
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number M5187
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size .5 in
Bolt Length 3.0 in
Measurement Average 3.04 mils

Test 20 of 32

DIME Test ID: 2020-08-20-11-20
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Bolt Length no data in
Measurement Average 4.44 mils

Test 21 of 32

DIME Test ID: 2020-08-20-11-21
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Bolt Length no data in
Measurement Average 3.63 mils

Test 22 of 32

DIME Test ID: 2020-08-20-11-22
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Bolt Length no data in
Measurement Average 4.61 mils

Test 23 of 32

DIME Test ID: 2020-08-20-11-23
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Bolt Length no data in
Measurement Average 4.21 mils

Test 24 of 32

DIME Test ID: 2020-08-20-11-24
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 17-04-005
Finish Coating ASTM B695 - Mech Galv
Product Markings DMC DH
Size .5 in
Bolt Length no data in
Measurement Average 4.5 mils

Test 25 of 32

DIME Test ID: 2020-08-20-11-25
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Measurement Average 2.48 mils

Test 26 of 32

DIME Test ID: 2020-08-20-11-26
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Measurement Average 2.35 mils

Test 27 of 32

DIME Test ID: 2020-08-20-11-27
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Measurement Average 2.45 mils

Test 28 of 32

DIME Test ID: 2020-08-20-11-28
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Measurement Average 2.53 mils

Test 29 of 32

DIME Test ID: 2020-08-20-11-29
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Measurement Average 2.19 mils

Test 30 of 32

DIME Test ID: 2020-08-20-11-30
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.7
Spacing Ok

Test 31 of 32

DIME Test ID: 2020-08-20-11-31
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.45
Spacing Ok

Test 32 of 32

DIME Test ID: 2020-08-20-11-32
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/02/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6057
Finish Coating ASTM B695 - Mech Galv
Product Markings W
Size .5 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38.7
Spacing Ok