Print Report | Back to Test Summary

Testing Report for 2020-05-21-35-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 020J1304
EFIS: 0219000064
Project ID: 214725
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-139-43.0/53.0
Work Description: COLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A).
Location Description: LASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer:
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-05-21-35
TL Number from the TL Form: 733194
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 5/21/2020
Date that the sample was received by the laboratory/organization performing the testing: 5/22/2020
The quantity of what the sample constitutes: JMF Verification Renewal
A brief description of the sample: Combined 1/2-inch Type A Untreated Virgin Aggregate
From where was the sample collected: Source
Laboratory sample identification: D78440F
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Shaw Pit

Material Information

Source Identification (SMARA or name of Pit): 91-25-0008
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: JMF 19-05-R1
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2020-05-21-35-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 7/13/2020
Verified Date: 7/17/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 97 %
Cumulative percent passing the 3/8 in. sieve: 82.6 %
Cumulative percent passing the 1/4 in. sieve: 66.4 %
Cumulative percent passing the #4 sieve: 56.9 %
Cumulative percent passing the #8 sieve: 33.3 %
Cumulative percent passing the #16 sieve: 19.8 %
Cumulative percent passing the #30 sieve: 12 %
Cumulative percent passing the #50 sieve: 7.6 %
Cumulative percent passing the #100 sieve: 5.2 %
Cumulative percent passing the #200 sieve: 4.19 %