Sample Record for 2020-06-30-4
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214216 DEA: 071XM404 EFIS: 0719000232
QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-33-22.16, 22.16
Work Description: This is the emergency project to repair pavement cracking, stabilize the eroded slope, construct a soldier pile tieback wall and reconstruct the steel post MGS
Location Description: Ventura County on Route 33 at PM.22.16.
Contractor Name: Case Pacific Contractors and Engineers
Contractor Address: 2121 Ardmore Road, Paso Robles, CA 93446
Resident Engineer: Alan Davis Structure Rep.: Aziz Maghsoudloo
Sample Information
DIME Sample ID: 2020-06-30-4
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office
Sample Organization Contact: (858) 285-5797
Type of Sample: Acceptance
Type of Material: SMTL TM5 - Threaded Bar
Sample Taken Date: 06/30/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/09/2020
The quantity of what the sample constitutes: Unknown
A brief description of the sample: Epoxy coated A722 All-Thread bars
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Wiiliams Form Eng
Material Information
Production or Authorization Testing: Production Testing
Threaded Bar Specification: ASTM A722
Threaded Bar Grade: 150
Threaded Bar Type: Plain
Rebar Size:
Nut Specification for Threaded Bar: ASTM A29/A108
System Manufacturer: Williams Form Eng
Epoxy Coating Color: Green
Threaded Bar Application: Threaded Bar
Coating Standards: ASTM A775 epoxy
Bar Heat Number(s): 62151266
Nut Heat Number(s): 8298464
Bar Lot Number: Unknown
Nut Lot Number: 26E5D
Coupler Heat Number(s): N/A
Coupler Grade: N/A
Test Results
Test 1 of 3
DIME Test ID: 2020-06-30-4-1
Test Method: ASTM A722-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete (Tensile)
Verified Date: 07/14/2020
Date Tested: 07/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Bar Heat #62151266 Nut Heat #26E5D
Test Result Compliance:
Additional Comments When Verified:
Number of Threaded Bar Samples
|
1
|
Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Reduction of area (%) | Comments | Tested By | 1 | ASTM A722 Type II Deformed Bar 1 : 26mm | L0806120 | 0.782 | 170252.33 | 153.83 | 0 | 32.3 | Bar Heat #62151266 Nut Heat #26E5D | fsaylor |
| |
Temperature
|
72 f
|
UTM
|
400kip
|
Test 2 of 3
DIME Test ID: 2020-06-30-4-2
Test Method: ASTM A722-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete (Tensile)
Verified Date: 07/14/2020
Date Tested: 07/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A722 Bar Heat #62151266
Test Result Compliance:
Additional Comments When Verified:
Number of Threaded Bar Samples
|
1
|
Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Reduction of area (%) | Comments | Tested By | 3 | ASTM A722 Type II Deformed Bar 1 : 26mm | L0806120 | 0.85 | 175360.01 | 169.00 | 5 | 100 | A722 Bar Heat #62151266 | fsaylor |
| |
Temperature
|
72 f
|
UTM
|
400kip
|
Test 3 of 3
DIME Test ID: 2020-06-30-4-3
Test Method: ASTM A722-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete (Tensile)
Verified Date: 07/14/2020
Date Tested: 07/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Stripped out
Test Result Compliance:
Additional Comments When Verified:
Number of Threaded Bar Samples
|
1
|
Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Reduction of area (%) | Comments | Tested By | 2 | ASTM A722 Type II Deformed Bar 1 : 26mm | L0806120 | 0.85 | 174692.08 | 151.36 | -100 | 100 | Nut Stripped out | fsaylor |
| |
Temperature
|
72 f
|
UTM
|
400kip
|