Print Report | Back to Test Summary

Testing Report for 2020-06-29-21-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 051M0004
EFIS: 0519000047
Project ID: 214731
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-101-16.5/R21.5
Work Description: COLD PLANE AND RHMA-GAP GRADED OVERLAY ON EXISTING ROADWAY.
Location Description: SAN LUIS OBISPO COUNTY IN AND NEAR PISMO BEACH FROM 0.1 MILE SOUTH OF PRICE CANYON ROAD TO SAN LUIS CREEK BRIDGE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Lilian Bennetzen
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-06-29-21
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Field Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 6/29/2020
Date that the sample was received by the laboratory/organization performing the testing: 6/29/2020
The quantity of what the sample constitutes: One JMF Verification
A brief description of the sample: Boxes of RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM Templeton

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2020-06-29-21-5
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Date Tested: 7/1/2020
Verified Date: 7/2/2020
Submitted By Organization: CT D05 - Field Laboratory
Organization Address: 50 Higuera St,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test: CPD 19-8 specifications for RHMA-G
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A): 15000
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B): 15000
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A): 11.67 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B): 8.38 mm
Stripping Inflection Point (Wheel A): 10037
Stripping Inflection Point (Wheel B): 10063