Print Report | Back to Test Summary

Testing Report for 2020-05-07-20-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 020J1604
EFIS:
Project ID: 214589
QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-284-0.0/8.3
Work Description: PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING).
Location Description: PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer:
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-05-07-20
TL Number from the TL Form: 733190
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 5/7/2020
Date that the sample was received by the laboratory/organization performing the testing: 5/8/2020
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4-inch Type A Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78425
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Ward Lake Plant, Litchfield, CA

Material Information

Source Identification (SMARA or name of Pit): 91-18-0008
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 20-03-S3
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2020-05-07-20-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 5/9/2020
Verified Date: 6/26/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Total mass of material in the sample: 5798.3 grams
Cumulative mass retained on the 1 1/2 in. sieve: no data
Cumulative mass retained on the 1 in. sieve: no data
Cumulative mass retained on the 3/4 in. sieve: 228 grams
Cumulative mass retained on the 1/2 in. sieve: 1501 grams
Cumulative mass retained on the 3/8 in. sieve: 2198 grams
Mass retained on the 1/4 in. sieve: 3329 grams
Cumulative mass retained on the #4 sieve: 3780 grams
Total sample mass passing the #4 sieve: 2018.3 grams
Total mass of fine material in the sample: 503.4 grams
Cumulative mass retained on the #8 sieve: 185 grams
Cumulative mass retained on the #16 sieve: 295.6 grams
Cumulative mass retained on the #30 sieve: 364.6 grams
Cumulative mass retained on the #50 sieve: 408.3 grams
Cumulative mass retained on the #100 sieve: 438.5 grams
Cumulative mass retained on the #200 sieve: 455.1 grams
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 96.1 %
Cumulative percent passing the 1/2 in. sieve: 74.1 %
Cumulative percent passing the 3/8 in. sieve: 62.1 %
Cumulative percent passing the 1/4 in. sieve: 42.6 %
Cumulative percent passing the #4 sieve: 34.8 %
Cumulative percent passing the #8 sieve: 22 %
Cumulative percent passing the #16 sieve: 14.4 %
Cumulative percent passing the #30 sieve: 9.6 %
Cumulative percent passing the #50 sieve: 6.6 %
Cumulative percent passing the #100 sieve: 4.5 %
Cumulative percent passing the #200 sieve: 3.34 %