Print Report | Back to Test Summary

Testing Report for 2020-04-14-9-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 101J1604
EFIS: 1018000180
Project ID: 214587
QA Service Level: 1
DIST-CO-RTE-PM: 10-STA-132-27.9/41.0
Work Description: COLD PLANE AC PAVEMENT, RHMA OVERLAY AND SLURRY SEAL.
Location Description: STANISLAUS COUNTY IN AND NEAR WATERFORD FROM G STREET TO 1.2 MILES EAST OF RUSHING ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Ranbir Bhullar
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-04-14-9
TL Number from the TL Form: C033878
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 4/14/2020
Date that the sample was received by the laboratory/organization performing the testing: 4/15/2020
The quantity of what the sample constitutes: Bags of Aggregate for JMF
A brief description of the sample: Virgin aggregate for 1/2 Type A HMA mix
From where was the sample collected: Source
Laboratory sample identification: 20-JMF-0045
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: George Reed Inc

Material Information

Source Identification (SMARA or name of Pit): 91-55-0005::TABLE MOUNTAIN QUARRY
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2020-04-14-9-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 4/17/2020
Verified Date: 4/23/2020
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Total mass of material in the sample: 4894.1 grams
Cumulative mass retained on the 1 1/2 in. sieve: no data
Cumulative mass retained on the 1 in. sieve: no data
Cumulative mass retained on the 3/4 in. sieve: no data
Cumulative mass retained on the 1/2 in. sieve: 219.5 grams
Cumulative mass retained on the 3/8 in. sieve: 772.2 grams
Cumulative mass retained on the #4 sieve: 2207.8 grams
Total sample mass passing the #4 sieve: 2686.3 grams
Total mass of fine material in the sample: 679.4 grams
Cumulative mass retained on the #8 sieve: 207 grams
Cumulative mass retained on the #16 sieve: 343.2 grams
Cumulative mass retained on the #30 sieve: 452.7 grams
Cumulative mass retained on the #50 sieve: 539.9 grams
Cumulative mass retained on the #100 sieve: 595.8 grams
Cumulative mass retained on the #200 sieve: 625.3 grams
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 95.5 %
Cumulative percent passing the 3/8 in. sieve: 84.2 %
Cumulative percent passing the #4 sieve: 54.9 %
Cumulative percent passing the #8 sieve: 38.2 %
Cumulative percent passing the #16 sieve: 27.2 %
Cumulative percent passing the #30 sieve: 18.3 %
Cumulative percent passing the #50 sieve: 11.3 %
Cumulative percent passing the #100 sieve: 6.8 %
Cumulative percent passing the #200 sieve: 4.37 %