Print Report | Back to Test Summary

Testing Report for 2020-02-03-9-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-02-03-9
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 2/3/2020
Date that the sample was received by the laboratory/organization performing the testing: 2/11/2020
The quantity of what the sample constitutes: 600'
A brief description of the sample: Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DS Brown

Material Information

Mfg. Lot Number(s): 0120108
Manufacturer(s): DS Brown
Temperature: 72
Humidity: 50
Comments: Unknown
Joint Seal Size: 5"

Test Information

DIME Test ID: 2020-02-03-9-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Date Tested: 2/12/2020
Verified Date: 3/4/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM: 11KIP
Temperature: 72 f
Humidity: 50 %
Spec Minimum Uncompressed Width: 5.12 in
Area (5 Times of the Height of Contact Face): 25.1625 sqin
Half of the Spec Minimum Uncompressed Width: no data
85 Percent of the Spec Minimum Uncompressed Width: 5.0335 in
3 Times of the Area: no data
4 Times of the Load at W1: no data
W1 (US Units): 4.38 in
W1 (Metric Units): 111.36 millimeters
W2 (US Units): 2.16 in
W2 (Metric Units): 54.84 millimeters
Satisfactory of MR of (US Units): 2.2252 in
Satisfactory of MR of (Metric Units): 56.52 millimeters
Optional W1 Measurement 1: no data
Optional W1 Measurement 2: no data