Print Report | Back to Sample Detail

Sample Record for 2020-02-13-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214231 DEA: 051M1704 EFIS: 0519000077 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-1-71.5/72, 71.5/72.0
Work Description: Polar Star Emergency wall and viaduct; NOTE ON FUNDING: This is an emergency project, per PM, METS (unit 3652) is covered for work on this project under WBS 270.44. Any issues with funding please notify METS Rep.
Location Description:
Contractor Name: SOUZA CONSTRUCTION
Contractor Address: 4027 Santa Fe Road, San Luis Obispo, CA 93403
Resident Engineer: Rick Silva Structure Rep.: Salvador Heredia

Sample Information

DIME Sample ID: 2020-02-13-7
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 02/13/2020
Date that the sample was received by the laboratory/organization performing the testing: 02/18/2020
The quantity of what the sample constitutes: 91 bolt assemblies
A brief description of the sample: 7/8" A325 bolt assembly
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name: Polar Star Sidehill Viaduct
The fabricator/manufacturer/facility name: Portland Bolt

Material Information

Rocap Number(s): none
Heat Number(s): bolt 100794352, nut 190518, washer B52967
Nut Mfg. Lot Number(s): 31113-S-190518
Washer Mfg. Lot Number(s): 0619-188
Bolt Specification: xASTM A325 Heavy Hex bolt Galv ASTM F3125
Bolt Length(s): 21"
Nut Specification: xASTM A563 HHN Grade DH HDG blue
Washer Specification: xASTM F436
Finish: HDG
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: 19529
Rocap Test Requirement(s): not required due to length
Lubricant Requirements(s):

Test Results

Test 1 of 19

DIME Test ID: 2020-02-13-7-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1A195290.875058340259.5110.00A325 Wedge Tensilespaine
UTM 450kip
Temperature no data

Test 2 of 19

DIME Test ID: 2020-02-13-7-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A31113-S-19051870349Nut Proof Loadspaine
UTM 450kip
Temperature 72 f

Test 3 of 19

DIME Test ID: 2020-02-13-7-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 19529
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325S PB
Size .875 in
Bolt Length 21 in
Gage Type Pass

Test 4 of 19

DIME Test ID: 2020-02-13-7-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 19529
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325S PB
Size .875 in
Bolt Length 21 in
Gage Type Pass

Test 5 of 19

DIME Test ID: 2020-02-13-7-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 19529
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325S PB
Size .875 in
Bolt Length 21 in
Gage Type Pass

Test 6 of 19

DIME Test ID: 2020-02-13-7-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31113-S-190518
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size .875 in
Gage Type Pass

Test 7 of 19

DIME Test ID: 2020-02-13-7-7
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31113-S-190518
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size .875 in
Gage Type Pass

Test 8 of 19

DIME Test ID: 2020-02-13-7-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31113-S-190518
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size .875 in
Gage Type Pass

Test 9 of 19

DIME Test ID: 2020-02-13-7-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 19529
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325S PB
Size .875 in
Bolt Length 21 in
Measurement Average 6.28 mils

Test 10 of 19

DIME Test ID: 2020-02-13-7-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 19529
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325S PB
Size .875 in
Bolt Length 21 in
Measurement Average 6.69 mils

Test 11 of 19

DIME Test ID: 2020-02-13-7-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 19529
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325S PB
Size .875 in
Bolt Length 21 in
Measurement Average 5.6 mils

Test 12 of 19

DIME Test ID: 2020-02-13-7-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31113-S-190518
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size .875 in
Bolt Length no data in
Measurement Average 2.98 mils

Test 13 of 19

DIME Test ID: 2020-02-13-7-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31113-S-190518
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size .875 in
Bolt Length no data in
Measurement Average 3.76 mils

Test 14 of 19

DIME Test ID: 2020-02-13-7-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31113-S-190518
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size .875 in
Bolt Length no data in
Measurement Average 5.02 mils

Test 15 of 19

DIME Test ID: 2020-02-13-7-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 0619-188
Finish Coating ASTM F2329 - Hot Dip
Product Markings TSI F436
Size .875 in
Bolt Length no data in
Measurement Average 4.92 mils

Test 16 of 19

DIME Test ID: 2020-02-13-7-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 0619-188
Finish Coating ASTM F2329 - Hot Dip
Product Markings TSI F436
Size .875 in
Bolt Length no data in
Measurement Average 4.26 mils

Test 17 of 19

DIME Test ID: 2020-02-13-7-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 0619-188
Finish Coating ASTM F2329 - Hot Dip
Product Markings TSI F436
Size .875 in
Bolt Length no data in
Measurement Average 4.04 mils

Test 18 of 19

DIME Test ID: 2020-02-13-7-18
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 0619-188
Finish Coating ASTM F2329 - Hot Dip
Product Markings TSI F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.45
Spacing Ok

Test 19 of 19

DIME Test ID: 2020-02-13-7-19
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/19/2020
Date Tested: 02/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 0619-188
Finish Coating ASTM F2329 - Hot Dip
Product Markings TSI F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38.5
Spacing Ok