Print Report | Back to Test Summary

Testing Report for 2020-01-24-17-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 080F6314
EFIS: 0813000220
Project ID: 210489
QA Service Level: 2
DIST-CO-RTE-PM: 08-SBD-395-11.2/16.6
Work Description: The scope of project is widening approximately 5 miles of US 395 from two lanes to four lanes, repave existing lanes, modify five signals, upgrade ADA access, add turn lanes, add sound walls, and extend bridge
Location Description: Project Limits are PM 11.2 from 16.6 and US 395.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Nabil Fraywat
Structure Rep.: Nabil Fraywat

Sample Information

DIME Sample ID: 2020-01-24-17
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 1/24/2020
Date that the sample was received by the laboratory/organization performing the testing: 1/29/2020
The quantity of what the sample constitutes: JMF 16 Bags
A brief description of the sample: 1 HMA-A-SP R15
From where was the sample collected: Manufacturer
Laboratory sample identification: 0119A-20
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond-Victorville

Material Information

Source Identification (SMARA or name of Pit): 91-36-0106
The fabricator's/manufacturer's product name for the sample: 1 HMA-A-SP R15
The fabricator/manufacturer designation for the sample: 300222-WM
The plant number: Unknown
A detailed description of where the material sample was collected: Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2020-01-24-17-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 2/5/2020
Verified Date: 3/17/2020
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test: Lime Treated Aggregate Gradation
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 89 %
Cumulative percent passing the 1/2 in. sieve: 70 %
Cumulative percent passing the 3/8 in. sieve: 61 %
Cumulative percent passing the 1/4 in. sieve: 50 %
Cumulative percent passing the #4 sieve: 47 %
Cumulative percent passing the #8 sieve: 38 %
Cumulative percent passing the #16 sieve: 28 %
Cumulative percent passing the #30 sieve: 17 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2.8 %