Print Report | Back to Test Summary

Testing Report for 2019-11-04-3-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888
QA Service Level:
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-11-04-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 11/4/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/8/2019
The quantity of what the sample constitutes: 500 ft
A brief description of the sample: 2.5" joint seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DS Brown

Material Information

Mfg. Lot Number(s): 0619388
Manufacturer(s): DS Brown
Temperature: 72
Humidity: 50
Comments: Unknown
Joint Seal Size: 2.5"

Test Information

DIME Test ID: 2019-11-04-3-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Date Tested: 11/18/2019
Verified Date: 11/19/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email:
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Temperature: 72 f
Humidity: 50 %
Spec Minimum Uncompressed Width: 2.68 in
Area (5 Times of the Height of Contact Face): 12.7775 sqin
Half of the Spec Minimum Uncompressed Width: 1.34 in
85 Percent of the Spec Minimum Uncompressed Width: 2.5555 in
3 Times of the Area: no data
4 Times of the Load at W1: no data
W1 (US Units): 2.27 in
W1 (Metric Units): 57.67 millimeters
W2 (US Units): 1.12 in
W2 (Metric Units): 28.43 millimeters
Satisfactory of MR of (US Units): 1.1512 in
Satisfactory of MR of (Metric Units): 29.24 millimeters
Optional W1 Measurement 1: no data
Optional W1 Measurement 2: no data