Print Report | Back to Test Summary

Testing Report for 2019-06-05-13-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-06-05-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 6/5/2019
Date that the sample was received by the laboratory/organization performing the testing: 6/17/2019
The quantity of what the sample constitutes: 153
A brief description of the sample: A325 Bolt Assembly
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: UIS SLSB

Material Information

Rocap Number(s):
Heat Number(s): 0288950 1043720 20355140 20424710 10538390 100893077 100887820 75073529 188792 188648 511 A51191 9515612 21832320 175289 282653 10560240 176422 1966355
Nut Mfg. Lot Number(s): 400602 29632-75073529 29575-S-188792 29747-S-188648
Washer Mfg. Lot Number(s): 343Z22 583B93 01343A D1214 D3962 D5831 D6603 308268 316254
Bolt Specification: A325
Bolt Length(s): 1.75" 2" 2.25" 2.5" 3" 5" 5.5"
Nut Specification: A563 DH
Washer Specification: F436 F959
Finish: MG HDG
Diameter/Size: .5" .625" .75" 1" 1.25" 2.5"
Bolt Mfg. Lot Number: BM0081 BM0509 BM0088 BM0122 BM0325 BM067
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Information

DIME Test ID: 2019-06-05-13-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Date Tested: 6/25/2019
Verified Date: 7/3/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Number of Bolt Samples: 1
Sample Bolt Mfg. Lot Number Size (in) Peak Load (lbf) Peak Load (kN) Wedge Angle (deg) Comments Tested By
3A BM0088 1/2\" 19995 88.9 10 A325 Brian
UTM: 400KIP
Temperature: no data