Print Report | Back to Test Summary

Testing Report for 2019-05-28-13-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-05-28-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 5/28/2019
Date that the sample was received by the laboratory/organization performing the testing: 6/3/2019
The quantity of what the sample constitutes: 600'
A brief description of the sample: Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DS Brown

Material Information

Mfg. Lot Number(s): 0219236
Manufacturer(s): DS Brown
Temperature: 72
Humidity: 50
Comments: Unknown
Joint Seal Size: 2.5

Test Information

DIME Test ID: 2019-05-28-13-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Date Tested: 6/7/2019
Verified Date: 6/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 43.4047 lbs
Width at 4 x Load at W1: 1.13944 in
Nominal Width: 2.5 in
Measured Maximum Uncompressed Width: 2.8705 in
Measured Minimum Uncompressed Width: 2.702 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.719 in
Height of Contact Face: 2.4715 in
Spec Minimum Uncompressed Width: 2.702 in
Area (5 Times of the Height of Contact Face): 12.358 sqin
Half of the Spec Minimum Uncompressed Width: 1.3595 in
85 Percent of the Spec Minimum Uncompressed Width: 2.2967 in
3 Times of the Area: 37.074 sqin
4 Times of the Load at W1: 173.619 in
W1 (US Units): 2.297 in
W1 (Metric Units): 58.336 millimeters
W2 (US Units): 1.139 in
W2 (Metric Units): 28.942 millimeters
Satisfactory of MR of (US Units): 1.157 in
Satisfactory of MR of (Metric Units): 29.394 millimeters
Optional W1 Measurement 1: 2.2967 in
Optional W1 Measurement 2: 37.3212 sqin