Print Report | Back to Test Summary

Testing Report for 2019-05-08-17-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 07303404
EFIS: 0714000006
Project ID: 213306
QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-33-0.0/6.3
Work Description: COLD PLANE AC PVMT, PLACE RUBBERIZED AC (TYPE G), AND REPLACE PCC PVMT
Location Description: VENTURA COUNTY IN AND NEAR VENTURA FROM ROUTE 33/101 SEPARATION TO 0.1 MILE SOUTH OF PARK VIEW DRIVE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Houshang Shohet
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-05-08-17
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 5/8/2019
Date that the sample was received by the laboratory/organization performing the testing: 5/10/2019
The quantity of what the sample constitutes: PSE 4 bags
A brief description of the sample: 1/2 RHMA-G-SP
From where was the sample collected: Manufacturer
Laboratory sample identification: 0274G-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Palmdale, Big Rock Creek, Blvd, Sheldon

Material Information

Source Identification (SMARA or name of Pit): 91-19-0017, 91-19-0019, 91-19-0021
The fabricator's/manufacturer's product name for the sample: 1/2 RHMA-G-SP
The fabricator/manufacturer designation for the sample: 326120 SAT LTR
The plant number: Unknown
A detailed description of where the material sample was collected: Belt Cut at Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2019-05-08-17-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 5/13/2019
Verified Date: 5/30/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 96 %
Cumulative percent passing the 3/8 in. sieve: 79 %
Cumulative percent passing the 1/4 in. sieve: 51 %
Cumulative percent passing the #4 sieve: 37 %
Cumulative percent passing the #8 sieve: 18 %
Cumulative percent passing the #16 sieve: 12 %
Cumulative percent passing the #30 sieve: 9 %
Cumulative percent passing the #50 sieve: 6 %
Cumulative percent passing the #100 sieve: 4 %
Cumulative percent passing the #200 sieve: 2.2 %