Print Report | Back to Sample Detail

Sample Record for 2019-05-03-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213606 DEA: 081E6104 EFIS: 0814000055 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-62-41.0/41.5and60.6/61.1
Work Description: WIDENING OF SHOULDER AND INSTALLING RUMBLE STRIPS
Location Description: SAN BERNARDINO COUNTY NEAR TWENTYNINE PALMS FROM 0.7 MILE TO 1.2 MILES EAST OF GODWIN ROAD AND FROM 5.6 MILES TO 6.1 MILES EAST OF IRONAGE ROAD
Contractor Name: All American Asphalt
Contractor Address: 400 E 6th STREET, Corona CA, 92878
Resident Engineer: Samer Georges Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-05-03-6
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/03/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/06/2019
The quantity of what the sample constitutes: 2 boxes 347.62 tons out
A brief description of the sample: 3/4" HMA-A R15
From where was the sample collected: Source
Laboratory sample identification: 0267A-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Perris

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2019-05-03-6-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/10/2019
Date Tested: 05/08/2019
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 4.68 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data