Print Report | Back to Test Summary

Testing Report for 2019-03-22-8-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081H0904
EFIS: 0816000141
Project ID: 213309
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-15-43.5
Work Description: CONSTRUCT A SECOND LEFT-TURN LANE
Location Description: RIVERSIDE COUNTY IN NORCO AT SECOND STREET UNDERCROSSING.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Xavier Avila
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-03-22-8
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 3/22/2019
Date that the sample was received by the laboratory/organization performing the testing: 3/26/2019
The quantity of what the sample constitutes: JMF 6 Bags
A brief description of the sample: 3/4" RHMA-G-SP Aggregate
From where was the sample collected: Fabricator
Laboratory sample identification: 0199G-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt Corona

Material Information

Source Identification (SMARA or name of Pit): 91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample: 106835
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Corona
A detailed description of where the material sample was collected: Belt cut of Coarse and Fine Aggregate at Source
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2019-03-22-8-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 3/27/2019
Verified Date: 5/8/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Total mass of material in the sample: 50199 grams
Cumulative mass retained on the 1 1/2 in. sieve: no data
Cumulative mass retained on the 1 in. sieve: no data
Cumulative mass retained on the 3/4 in. sieve: 1406 grams
Cumulative mass retained on the 1/2 in. sieve: 8946 grams
Cumulative mass retained on the 3/8 in. sieve: 19310 grams
Mass retained on the 1/4 in. sieve: 19310 grams
Cumulative mass retained on the #4 sieve: 37527 grams
Total sample mass passing the #4 sieve: 12672 grams
Total mass of fine material in the sample: 510 grams
Cumulative mass retained on the #8 sieve: 250 grams
Cumulative mass retained on the #16 sieve: 331 grams
Cumulative mass retained on the #30 sieve: 376 grams
Cumulative mass retained on the #50 sieve: 407 grams
Cumulative mass retained on the #100 sieve: 432 grams
Cumulative mass retained on the #200 sieve: 451 grams
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 97.2 %
Cumulative percent passing the 1/2 in. sieve: 82.2 %
Cumulative percent passing the 3/8 in. sieve: 61.5 %
Cumulative percent passing the 1/4 in. sieve: 61.5 %
Cumulative percent passing the #4 sieve: 25.2 %
Cumulative percent passing the #8 sieve: 12.8 %
Cumulative percent passing the #16 sieve: 8.8 %
Cumulative percent passing the #30 sieve: 6.6 %
Cumulative percent passing the #50 sieve: 5.1 %
Cumulative percent passing the #100 sieve: 3.9 %
Cumulative percent passing the #200 sieve: 2.92 %