Print Report | Back to Sample Detail

Sample Record for 2019-03-01-14

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-03-01-14
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/01/2019
Date that the sample was received by the laboratory/organization performing the testing: 03/27/2019
The quantity of what the sample constitutes: 32
A brief description of the sample: A325 Bolts, Nuts, Washers, A449 Bolts
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Nucor, Fontana, KT

Material Information

Rocap Number(s):
Heat Number(s):
Nut Mfg. Lot Number(s): 411793A
Washer Mfg. Lot Number(s): 314373
Bolt Specification: A325, A449
Bolt Length(s): 1.75, 2.5, 3, 4, 5.5, 6
Nut Specification: A563
Washer Specification: F436
Finish: HDG
Diameter/Size: .625, .75, 1, 1.25,
Bolt Mfg. Lot Number: 392966B, 54147-2, 806658, 820108, 805937, 816
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 92

DIME Test ID: 2019-03-01-14-1
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Verified Date: 04/15/2019
Date Tested: 04/09/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A449 Bolt
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleSizeArea (in^2)Peak Load (lbf)Peak Load (kN)Tensile Strength (psi)Stress at Offset (psi)Load at Offset (lbf)Comments
2AA449 Bolt0.2263064813613561112654828600A449 Bolt
UTM 400KIP
Temperature 72

Test 2 of 92

DIME Test ID: 2019-03-01-14-3
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Verified Date: 04/15/2019
Date Tested: 04/09/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A449 Bolt
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleSizeArea (in^2)Peak Load (lbf)Peak Load (kN)Tensile Strength (psi)Stress at Offset (psi)Load at Offset (lbf)Comments
2BA449 Bolt0.226307321361359827116316083A449 Bolt
UTM 400KIP
Temperature 72

Test 3 of 92

DIME Test ID: 2019-03-01-14-5
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/15/2019
Date Tested: 04/09/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
4A8201083/4\"5103022710A325Brian
UTM 400KIP
Temperature no data

Test 4 of 92

DIME Test ID: 2019-03-01-14-6
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/15/2019
Date Tested: 04/09/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
7A8203231\"87189387.810A325Brian
UTM 400KIP
Temperature no data

Test 5 of 92

DIME Test ID: 2019-03-01-14-7
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/15/2019
Date Tested: 04/09/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
8A8203231\"90446402.310A325Brian
UTM 400KIP
Temperature no data

Test 6 of 92

DIME Test ID: 2019-03-01-14-8
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 04/15/2019
Date Tested: 04/10/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
8A411793A1\"93482415.83Nut ProofBrian
UTM 400KIP
Temperature 72 F

Test 7 of 92

DIME Test ID: 2019-03-01-14-9
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 8 of 92

DIME Test ID: 2019-03-01-14-10
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 9 of 92

DIME Test ID: 2019-03-01-14-11
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 10 of 92

DIME Test ID: 2019-03-01-14-12
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 11 of 92

DIME Test ID: 2019-03-01-14-13
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 12 of 92

DIME Test ID: 2019-03-01-14-14
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1F
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 13 of 92

DIME Test ID: 2019-03-01-14-15
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1G
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Gage Type Pass

Test 14 of 92

DIME Test ID: 2019-03-01-14-16
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Gage Type Pass

Test 15 of 92

DIME Test ID: 2019-03-01-14-17
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Gage Type Pass

Test 16 of 92

DIME Test ID: 2019-03-01-14-18
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Gage Type Pass

Test 17 of 92

DIME Test ID: 2019-03-01-14-19
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Gage Type Pass

Test 18 of 92

DIME Test ID: 2019-03-01-14-20
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Gage Type Pass

Test 19 of 92

DIME Test ID: 2019-03-01-14-21
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test 20 of 92

DIME Test ID: 2019-03-01-14-22
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test 21 of 92

DIME Test ID: 2019-03-01-14-23
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test 22 of 92

DIME Test ID: 2019-03-01-14-24
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820108
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 2.5 in
Gage Type Pass

Test 23 of 92

DIME Test ID: 2019-03-01-14-25
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820108
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 2.5 in
Gage Type Pass

Test 24 of 92

DIME Test ID: 2019-03-01-14-26
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820108
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 2.5 in
Gage Type Pass

Test 25 of 92

DIME Test ID: 2019-03-01-14-27
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Gage Type Pass

Test 26 of 92

DIME Test ID: 2019-03-01-14-28
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Gage Type Pass

Test 27 of 92

DIME Test ID: 2019-03-01-14-29
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Gage Type Pass

Test 28 of 92

DIME Test ID: 2019-03-01-14-30
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Gage Type Pass

Test 29 of 92

DIME Test ID: 2019-03-01-14-31
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Gage Type Pass

Test 30 of 92

DIME Test ID: 2019-03-01-14-32
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Gage Type Pass

Test 31 of 92

DIME Test ID: 2019-03-01-14-33
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Gage Type Pass

Test 32 of 92

DIME Test ID: 2019-03-01-14-34
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Gage Type Pass

Test 33 of 92

DIME Test ID: 2019-03-01-14-35
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820323
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 4 in
Gage Type Pass

Test 34 of 92

DIME Test ID: 2019-03-01-14-36
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820323
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 4 in
Gage Type Pass

Test 35 of 92

DIME Test ID: 2019-03-01-14-37
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820323
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 4 in
Gage Type Pass

Test 36 of 92

DIME Test ID: 2019-03-01-14-38
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 810633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 5.5 in
Gage Type Pass

Test 37 of 92

DIME Test ID: 2019-03-01-14-39
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 810633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 5.5 in
Gage Type Pass

Test 38 of 92

DIME Test ID: 2019-03-01-14-40
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 810633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 5.5 in
Gage Type Pass

Test 39 of 92

DIME Test ID: 2019-03-01-14-41
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 411793A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 40 of 92

DIME Test ID: 2019-03-01-14-42
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 411793A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 41 of 92

DIME Test ID: 2019-03-01-14-43
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 411793A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 42 of 92

DIME Test ID: 2019-03-01-14-44
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 3.73 mils

Test 43 of 92

DIME Test ID: 2019-03-01-14-45
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 3.86 mils

Test 44 of 92

DIME Test ID: 2019-03-01-14-46
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 4.94 mils

Test 45 of 92

DIME Test ID: 2019-03-01-14-47
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 4.76 mils

Test 46 of 92

DIME Test ID: 2019-03-01-14-48
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 4.09 mils

Test 47 of 92

DIME Test ID: 2019-03-01-14-49
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1F
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 3.28 mils

Test 48 of 92

DIME Test ID: 2019-03-01-14-50
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1G
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Measurement Average 3.22 mils

Test 49 of 92

DIME Test ID: 2019-03-01-14-51
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Measurement Average 4.06 mils

Test 50 of 92

DIME Test ID: 2019-03-01-14-52
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Measurement Average 3.07 mils

Test 51 of 92

DIME Test ID: 2019-03-01-14-53
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Measurement Average 4.37 mils

Test 52 of 92

DIME Test ID: 2019-03-01-14-54
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Measurement Average 4.23 mils

Test 53 of 92

DIME Test ID: 2019-03-01-14-55
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 54147-2
Finish Coating ASTM F2329 - Hot Dip
Product Markings KT A449
Size .625 in
Bolt Length 6 in
Measurement Average 3.56 mils

Test 54 of 92

DIME Test ID: 2019-03-01-14-56
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Measurement Average 2.18 mils

Test 55 of 92

DIME Test ID: 2019-03-01-14-57
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Measurement Average 2.25 mils

Test 56 of 92

DIME Test ID: 2019-03-01-14-58
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Measurement Average 0 mils

Test 57 of 92

DIME Test ID: 2019-03-01-14-59
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820108
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 2.5 in
Measurement Average 3.03 mils

Test 58 of 92

DIME Test ID: 2019-03-01-14-60
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820108
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 2.5 in
Measurement Average 2.66 mils

Test 59 of 92

DIME Test ID: 2019-03-01-14-61
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820108
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 2.5 in
Measurement Average 2.63 mils

Test 60 of 92

DIME Test ID: 2019-03-01-14-62
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Measurement Average 2.24 mils

Test 61 of 92

DIME Test ID: 2019-03-01-14-63
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Measurement Average 2.14 mils

Test 62 of 92

DIME Test ID: 2019-03-01-14-64
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Measurement Average 2.4 mils

Test 63 of 92

DIME Test ID: 2019-03-01-14-65
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Measurement Average 3.48 mils

Test 64 of 92

DIME Test ID: 2019-03-01-14-66
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Measurement Average 2.65 mils

Test 65 of 92

DIME Test ID: 2019-03-01-14-67
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Measurement Average 2.77 mils

Test 66 of 92

DIME Test ID: 2019-03-01-14-68
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Measurement Average 2.82 mils

Test 67 of 92

DIME Test ID: 2019-03-01-14-69
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Measurement Average 2.76 mils

Test 68 of 92

DIME Test ID: 2019-03-01-14-70
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820323
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 4 in
Measurement Average 2.9 mils

Test 69 of 92

DIME Test ID: 2019-03-01-14-71
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820323
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 4 in
Measurement Average 2.6 mils

Test 70 of 92

DIME Test ID: 2019-03-01-14-72
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 820323
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 4 in
Measurement Average 2.87 mils

Test 71 of 92

DIME Test ID: 2019-03-01-14-73
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 810633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 4.06 mils

Test 72 of 92

DIME Test ID: 2019-03-01-14-74
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 810633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 2.68 mils

Test 73 of 92

DIME Test ID: 2019-03-01-14-75
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 810633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 2.89 mils

Test 74 of 92

DIME Test ID: 2019-03-01-14-76
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 411793A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 3.88 mils

Test 75 of 92

DIME Test ID: 2019-03-01-14-77
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 411793A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 4.17 mils

Test 76 of 92

DIME Test ID: 2019-03-01-14-78
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 411793A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 5.97 mils

Test 77 of 92

DIME Test ID: 2019-03-01-14-79
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314373
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Measurement Average 4.66 mils

Test 78 of 92

DIME Test ID: 2019-03-01-14-80
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314373
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Measurement Average 4.42 mils

Test 79 of 92

DIME Test ID: 2019-03-01-14-81
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314373
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Measurement Average 3.45 mils

Test 80 of 92

DIME Test ID: 2019-03-01-14-82
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 26.05
Spacing Ok

Test 81 of 92

DIME Test ID: 2019-03-01-14-83
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 26.22
Spacing Ok

Test 82 of 92

DIME Test ID: 2019-03-01-14-84
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.7
Spacing Ok

Test 83 of 92

DIME Test ID: 2019-03-01-14-85
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 392966B
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N USA
Size .625 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 26.35
Spacing Ok

Test 84 of 92

DIME Test ID: 2019-03-01-14-86
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.97
Spacing Ok

Test 85 of 92

DIME Test ID: 2019-03-01-14-87
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 806658
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size .75 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 25.82
Spacing Ok

Test 86 of 92

DIME Test ID: 2019-03-01-14-88
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 31.4
Spacing Ok

Test 87 of 92

DIME Test ID: 2019-03-01-14-89
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 805937
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1 in
Bolt Length 2.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 32
Spacing Ok

Test 88 of 92

DIME Test ID: 2019-03-01-14-90
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Hardness Reading Scale C Scale
Hardness Reading Average 32.47
Spacing Ok

Test 89 of 92

DIME Test ID: 2019-03-01-14-91
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Hardness Reading Scale C Scale
Hardness Reading Average 33.05
Spacing Ok

Test 90 of 92

DIME Test ID: 2019-03-01-14-92
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 816633
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 LE USA
Size 1.25 in
Bolt Length 3 in
Hardness Reading Scale C Scale
Hardness Reading Average 33.57
Spacing Ok

Test 91 of 92

DIME Test ID: 2019-03-01-14-93
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314373
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 34
Spacing Ok

Test 92 of 92

DIME Test ID: 2019-03-01-14-94
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/15/2019
Date Tested: 04/11/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314373
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 35.75
Spacing Ok