Print Report | Back to Test Summary

Testing Report for 2018-05-31-18-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 023H1504
EFIS: 0217000064
Project ID: 212784
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-299-0.0/4.7
Work Description: AC OVERLAY, REPLACE ASPHALT CONCRETE SURFACING AND GUARDRAIL.
Location Description: LASSEN COUNTY NEAR MCARTHUR FROM SHASTA COUNTY LINE TO 4.0 MILES WEST OF MUCK VALLEY HYDRO ROAD.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Tofael Anwar
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-05-31-18
TL Number from the TL Form: 736683
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 5/31/2018
Date that the sample was received by the laboratory/organization performing the testing: 5/31/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined Treated Virgin Type A Aggregate
From where was the sample collected: Source
Laboratory sample identification: D77434
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fawndale Rock and Asphalt

Material Information

Source Identification (SMARA or name of Pit): 91-45-0017::FAWNDALE ROCK QUARRY
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 18-03-M1
Lot number:
Sublot number:

Test Information

DIME Test ID: 2018-05-31-18-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 6/1/2018
Verified Date: 1/4/2019
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99.4 %
Cumulative percent passing the 1/2 in. sieve: 77.2 %
Cumulative percent passing the 3/8 in. sieve: 62.7 %
Cumulative percent passing the 1/4 in. sieve: 48.2 %
Cumulative percent passing the #4 sieve: 40.7 %
Cumulative percent passing the #8 sieve: 24.5 %
Cumulative percent passing the #16 sieve: 15.2 %
Cumulative percent passing the #30 sieve: 9.9 %
Cumulative percent passing the #50 sieve: 6.8 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 3.93 %