Print Report | Back to Test Summary

Testing Report for 2014-01-22-1160-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 023E9304
EFIS:
Project ID: 7051
QA Service Level: 1
DIST-CO-RTE-PM: 02-TRI,TRI-299-0.0/0.1,64.0/72.2
Work Description: HMA THIN BLANKET OVERLAY WITH DIGOUTS
Location Description: SHASTA AND TRINITY COUNTIES AT AND NEAR DOUGLAS CITY FROM 0.5 MILE EAST OF LEWISTON ROAD TO 0.1 MILE EAST OF SHASTA COUNTY LINE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Wayne Rinard
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2014-01-22-1160
TL Number from the TL Form:
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Informational
Type of Material: Aggregate
Sample Taken Date: 1/22/2014
Date that the sample was received by the laboratory/organization performing the testing: 1/22/2014
The quantity of what the sample constitutes: 4 cores
A brief description of the sample: 1/2-inch Type A aggregate extracted by ignition from HMA
From where was the sample collected: Other
Laboratory sample identification: D75699 / 678943
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis Inc. - Northstate Asphalt (Redding CA)

Material Information

Source Identification (SMARA or name of Pit): SMARA ID No. 91-45-0057 / MSHA Mine ID No. 0405753
The fabricator's/manufacturer's product name for the sample: 1/2-inch HMA Type A
The fabricator/manufacturer designation for the sample: Mix ID No. L120644BTR
The plant number:
A detailed description of where the material sample was collected: Cored from in-place HMA on the roadway
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size:
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2014-01-22-1160-1
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Date Tested: 2/4/2014
Verified Date: 5/21/2014
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test: Information only - not for Acceptance.
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 98 %
Cumulative percent passing the 3/8 in. sieve: 89 %
Cumulative percent passing the #4 sieve: 58 %
Cumulative percent passing the #8 sieve: 37 %
Cumulative percent passing the #16 sieve: 25 %
Cumulative percent passing the #30 sieve: 19 %
Cumulative percent passing the #50 sieve: 14 %
Cumulative percent passing the #100 sieve: 10 %
Cumulative percent passing the #200 sieve: 8.1 %