Print Report | Back to Test Summary

Testing Report for 2018-08-08-16-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-08-08-16
TL Number from the TL Form: NA
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 8/8/2018
Date that the sample was received by the laboratory/organization performing the testing: 8/10/2018
The quantity of what the sample constitutes: 550ft
A brief description of the sample: Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman

Material Information

Mfg. Lot Number(s): 1918312
Manufacturer(s): Watson Bowman
Temperature: 72
Humidity: 50
Comments: Unknown
Joint Seal Size: 3.75

Test Information

DIME Test ID: 2018-08-08-16-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Date Tested: 8/30/2018
Verified Date: 9/12/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 55.5139 lbs
Width at 4 x Load at W1: 1.55979 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.9705 in
Measured Minimum Uncompressed Width: 3.794 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.821 in
Height of Contact Face: 3.623 in
Spec Minimum Uncompressed Width: 3.794 in
Area (5 Times of the Height of Contact Face): 18.115 sqin
Half of the Spec Minimum Uncompressed Width: 1.9105 in
85 Percent of the Spec Minimum Uncompressed Width: 3.2249 in
3 Times of the Area: 54.345 sqin
4 Times of the Load at W1: 222.056 in
W1 (US Units): 3.225 in
W1 (Metric Units): 81.912 millimeters
W2 (US Units): 1.56 in
W2 (Metric Units): 39.619 millimeters
Satisfactory of MR of (US Units): 1.665 in
Satisfactory of MR of (Metric Units): 42.294 millimeters
Optional W1 Measurement 1: 3.2249 in
Optional W1 Measurement 2: 54.7073 sqin