Print Report | Back to Test Summary

Testing Report for 2018-05-15-41-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 023H1304
EFIS:
Project ID: 212845
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-395-47.0/56.5
Work Description: AC OVERLAY, REPLACE AC SURFACE, RUMBLE STRIP, GUARDRAIL
Location Description: LASSEN COUNTY AT AND NEAR JANESVILLE FROM 1.9 MILES SOUTH OF LAKECREST DRIVE TO 0.2 MILE NORTH OF SUNNYSIDE ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: JOHN YOLTON
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-05-15-41
TL Number from the TL Form: 894810
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 5/15/2018
Date that the sample was received by the laboratory/organization performing the testing: 5/16/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Untreated Virgin 3/4-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77395F
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek - Ward Lake

Material Information

Source Identification (SMARA or name of Pit): 91-18-0008::WARD LAKE PIT
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: 18-1278.96
The plant number: Unknown
A detailed description of where the material sample was collected: Laboratory Batched
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 18-07-S1
Lot number:
Sublot number:

Test Information

DIME Test ID: 2018-05-15-41-5
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Date Tested: 6/8/2018
Verified Date: 8/23/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Grading designation: B
Percent loss after 100 revolutions: 4 %
Percent loss after 500 revolutions: 19 %