Print Report | Back to Sample Detail

Sample Record for 2018-04-19-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 3807 DEA: 07121844 EFIS: 0700000117 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-42.8/47.3
Work Description: CONSTRUCT HOV LANES, RETAINING WALLS AND SOUND WALLS.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES, GLENDALE, AND BURBANK FROM ROUTE 5/134 SEPARATION TO MAGNOLIA BOULEVARD OVERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVENUE, SYLMAR, CA 91342
Resident Engineer: James Shih Structure Rep.: Matthew Remo

Sample Information

DIME Sample ID: 2018-04-19-3
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 04/19/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/20/2018
The quantity of what the sample constitutes: 2 lots
A brief description of the sample: A325 MG Rocap Assemblies
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SLSB

Material Information

Rocap Number(s): TT0100662, TT0100663
Heat Number(s):
Nut Mfg. Lot Number(s): 26790-6214342302, 24891-166809
Washer Mfg. Lot Number(s): D4413, M4664
Bolt Specification: F3125, A325
Bolt Length(s): 2.5, 2.250
Nut Specification: A563
Washer Specification: F436
Finish: B695
Diameter/Size: 7/8, 3/4
Bolt Mfg. Lot Number: BM0555, M4664
Rocap Test Requirement(s):
Lubricant Requirements(s): Blue

Test Results

Test 1 of 38

DIME Test ID: 2018-04-19-3-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A24891-166809?\"50802225.98Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 2 of 38

DIME Test ID: 2018-04-19-3-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1B24891-166809?\"50614225.14Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 3 of 38

DIME Test ID: 2018-04-19-3-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
2A26790-62143423027/8\"70727314.61Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 4 of 38

DIME Test ID: 2018-04-19-3-4
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
2B26790-62143423027/8\"70779314.84Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 5 of 38

DIME Test ID: 2018-04-19-3-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Gage Type Pass

Test 6 of 38

DIME Test ID: 2018-04-19-3-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Gage Type Pass

Test 7 of 38

DIME Test ID: 2018-04-19-3-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Gage Type Pass

Test 8 of 38

DIME Test ID: 2018-04-19-3-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Measurement Average 3.82 mils

Test 9 of 38

DIME Test ID: 2018-04-19-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Measurement Average 4.98 mils

Test 10 of 38

DIME Test ID: 2018-04-19-3-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Measurement Average 3.41 mils

Test 11 of 38

DIME Test ID: 2018-04-19-3-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 24891-166809
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .750 in
Bolt Length no data in
Measurement Average 2.84 mils

Test 12 of 38

DIME Test ID: 2018-04-19-3-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 24891-166809
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .750 in
Bolt Length no data in
Measurement Average 3.74 mils

Test 13 of 38

DIME Test ID: 2018-04-19-3-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 24891-166809
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .750 in
Bolt Length no data in
Measurement Average 3.49 mils

Test 14 of 38

DIME Test ID: 2018-04-19-3-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 308269
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .750 in
Bolt Length no data in
Measurement Average 2.52 mils

Test 15 of 38

DIME Test ID: 2018-04-19-3-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 308269
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .750 in
Bolt Length no data in
Measurement Average 2.32 mils

Test 16 of 38

DIME Test ID: 2018-04-19-3-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 308269
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .750 in
Bolt Length no data in
Measurement Average 2.39 mils

Test 17 of 38

DIME Test ID: 2018-04-19-3-17
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Hardness Reading Scale C Scale
Hardness Reading Average 30.12
Spacing Ok

Test 18 of 38

DIME Test ID: 2018-04-19-3-18
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number M4664
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .750 in
Bolt Length 2.250 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.42
Spacing Ok

Test 19 of 38

DIME Test ID: 2018-04-19-3-19
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 308269
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .750 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.45
Spacing Ok

Test 20 of 38

DIME Test ID: 2018-04-19-3-20
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0100663
Heat Number(s) no data
Mfg. Lot Number 308269
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .750 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.8
Spacing Ok

Test 21 of 38

DIME Test ID: 2018-04-19-3-21
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Gage Type Pass

Test 22 of 38

DIME Test ID: 2018-04-19-3-22
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Gage Type Pass

Test 23 of 38

DIME Test ID: 2018-04-19-3-23
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Gage Type Pass

Test 24 of 38

DIME Test ID: 2018-04-19-3-24
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Measurement Average 2.67 mils

Test 25 of 38

DIME Test ID: 2018-04-19-3-25
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Measurement Average 2.89 mils

Test 26 of 38

DIME Test ID: 2018-04-19-3-26
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Measurement Average 2.98 mils

Test 27 of 38

DIME Test ID: 2018-04-19-3-27
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number 26790-6214342302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 2.91 mils

Test 28 of 38

DIME Test ID: 2018-04-19-3-28
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number 26790-6214342302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 3.43 mils

Test 29 of 38

DIME Test ID: 2018-04-19-3-29
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number 26790-6214342302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 4.28 mils

Test 30 of 38

DIME Test ID: 2018-04-19-3-30
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 3.41 mils

Test 31 of 38

DIME Test ID: 2018-04-19-3-31
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 3.86 mils

Test 32 of 38

DIME Test ID: 2018-04-19-3-32
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 3.68 mils

Test 33 of 38

DIME Test ID: 2018-04-19-3-33
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.27
Spacing Ok

Test 34 of 38

DIME Test ID: 2018-04-19-3-34
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number BM0555
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL
Size .875 in
Bolt Length 2.50 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.17
Spacing Ok

Test 35 of 38

DIME Test ID: 2018-04-19-3-35
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 37.1
Spacing Ok

Test 36 of 38

DIME Test ID: 2018-04-19-3-36
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 35.5
Spacing Ok

Test 37 of 38

DIME Test ID: 2018-04-19-3-37
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 36.92
Spacing Ok

Test 38 of 38

DIME Test ID: 2018-04-19-3-38
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/02/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2D
Rocap Number TT0100662
Heat Number(s) no data
Mfg. Lot Number D4413
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 36.8
Spacing Ok