Sample Record for 2018-04-19-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 3807 DEA: 07121844 EFIS: 0700000117
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-42.8/47.3
Work Description: CONSTRUCT HOV LANES, RETAINING WALLS AND SOUND WALLS.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES, GLENDALE, AND BURBANK FROM ROUTE 5/134 SEPARATION TO MAGNOLIA BOULEVARD OVERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVENUE, SYLMAR, CA 91342
Resident Engineer: James Shih Structure Rep.: Matthew Remo
Sample Information
DIME Sample ID: 2018-04-19-1
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT - Unassigned/General Field Laboratory
Sample Organization Contact: 5625005861
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 04/19/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/20/2018
The quantity of what the sample constitutes: 3 lots
A brief description of the sample: A490 Bolts
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SLSB
Material Information
Rocap Number(s): TT0100659, TT0100660, TT0100661
Heat Number(s):
Nut Mfg. Lot Number(s): 27479-178004
Washer Mfg. Lot Number(s): 307768
Bolt Specification: F3125, A490
Bolt Length(s): 2.75", 3", 3.250
Nut Specification: A563
Washer Specification: F436
Finish: Black
Diameter/Size: 1"
Bolt Mfg. Lot Number: 752410, 043097, 041847
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 28
DIME Test ID: 2018-04-19-1-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A490
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | 3A | 041847 | 1\" | 98021 | 436 | 10 | A490 | Fred |
| |
UTM
|
400KIP
|
Temperature
|
no data
|
Test 2 of 28
DIME Test ID: 2018-04-19-1-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1A | 27479-178004 | 1-8 HEX | 108440 | 482.35 | Nut Proof | Fred |
| |
UTM
|
400KIP
|
Temperature
|
72 F
|
Test 3 of 28
DIME Test ID: 2018-04-19-1-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1B | 27479-178004 | 1-8 HEX | 109200 | 485.75 | Nut Proof | Fred |
| |
UTM
|
400KIP
|
Temperature
|
72 F
|
Test 4 of 28
DIME Test ID: 2018-04-19-1-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752410
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
2.34 in
|
Gage Type
|
Pass
|
Test 5 of 28
DIME Test ID: 2018-04-19-1-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752410
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
2.34 in
|
Gage Type
|
Pass
|
Test 6 of 28
DIME Test ID: 2018-04-19-1-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752410
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
2.34 in
|
Gage Type
|
Pass
|
Test 7 of 28
DIME Test ID: 2018-04-19-1-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2A
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
043097
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Gage Type
|
Pass
|
Test 8 of 28
DIME Test ID: 2018-04-19-1-8
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2B
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
043097
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Gage Type
|
Pass
|
Test 9 of 28
DIME Test ID: 2018-04-19-1-9
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2C
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
043097
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Gage Type
|
Pass
|
Test 10 of 28
DIME Test ID: 2018-04-19-1-10
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
TT0100661
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
041847
|
Finish Coating
|
Plain
|
Product Markings
|
A490
|
Size
|
1 in
|
Bolt Length
|
3.250 in
|
Gage Type
|
Pass
|
Test 11 of 28
DIME Test ID: 2018-04-19-1-11
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
TT0100661
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
041847
|
Finish Coating
|
Plain
|
Product Markings
|
A490
|
Size
|
1 in
|
Bolt Length
|
3.250 in
|
Gage Type
|
Pass
|
Test 12 of 28
DIME Test ID: 2018-04-19-1-12
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
TT0100661
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
041847
|
Finish Coating
|
Plain
|
Product Markings
|
A490
|
Size
|
1 in
|
Bolt Length
|
3.250 in
|
Gage Type
|
Pass
|
Test 13 of 28
DIME Test ID: 2018-04-19-1-13
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 14 of 28
DIME Test ID: 2018-04-19-1-14
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 15 of 28
DIME Test ID: 2018-04-19-1-15
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 16 of 28
DIME Test ID: 2018-04-19-1-16
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2A
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 17 of 28
DIME Test ID: 2018-04-19-1-17
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2B
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 18 of 28
DIME Test ID: 2018-04-19-1-18
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2C
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 19 of 28
DIME Test ID: 2018-04-19-1-19
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 20 of 28
DIME Test ID: 2018-04-19-1-20
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 21 of 28
DIME Test ID: 2018-04-19-1-21
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
27479-178004
|
Finish Coating
|
Plain
|
Product Markings
|
U DH
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 22 of 28
DIME Test ID: 2018-04-19-1-22
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752410
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
2.34 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
33.8
|
Spacing
|
Ok
|
Test 23 of 28
DIME Test ID: 2018-04-19-1-23
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
TT0100659
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752410
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
2.34 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
32.4
|
Spacing
|
Ok
|
Test 24 of 28
DIME Test ID: 2018-04-19-1-24
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2A
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
043097
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
32.35
|
Spacing
|
Ok
|
Test 25 of 28
DIME Test ID: 2018-04-19-1-25
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2B
|
Rocap Number
|
TT0100660
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
043097
|
Finish Coating
|
Plain
|
Product Markings
|
A490 LE
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
31.57
|
Spacing
|
Ok
|
Test 26 of 28
DIME Test ID: 2018-04-19-1-26
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
TT0100659, TT0100660, TT0100661
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
307768
|
Finish Coating
|
Plain
|
Product Markings
|
WS
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
40.6
|
Spacing
|
Ok
|
Test 27 of 28
DIME Test ID: 2018-04-19-1-27
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
TT0100659, TT0100660, TT0100661
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
307768
|
Finish Coating
|
Plain
|
Product Markings
|
WS
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
40.6
|
Spacing
|
Ok
|
Test 28 of 28
DIME Test ID: 2018-04-19-1-28
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/01/2018
Date Tested: 04/25/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
TT0100659, TT0100660, TT0100661
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
307768
|
Finish Coating
|
Plain
|
Product Markings
|
WS
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
41.3
|
Spacing
|
Ok
|