Print Report | Back to Test Summary

Testing Report for 2018-01-18-4-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 071218W4
EFIS: 0700021119
Project ID: 7613
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-29.4/31.6
Work Description: REALIGN ROUTE 5 AND RAILROAD TRACKS AND RECONFIGURE ON- AND OFF-RAMPS.
Location Description: LOS ANGELES COUNTY IN BURBANK FROM WEST MAGNOLIA BOULEVARD OVERCROSSING TO 0.3 MILE NORTH OF BUENA VISTA STREET/WINONA AVENUE UNDERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Vladimir Gurfinkel
Structure Rep.: Gon Choi

Sample Information

DIME Sample ID: 2018-01-18-4
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 1/18/2018
Date that the sample was received by the laboratory/organization performing the testing: 1/18/2018
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik bond and Reichhold

Material Information

Mfg. Lot Number(s): 1097982
Batch number: 1097982
Mix number: 1097982

Test Information

DIME Test ID: 2018-01-18-4-1
Test Method: CONCLP 3-16: Polyester Resin
Date Tested: 2/7/2018
Verified Date: 4/19/2018
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: polyester resin batch# 0001097982 is satisfactory for use.
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 117
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.07
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 58.4
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2999
Styrene ASTM D 2369 40% to 50 %: 45
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 558
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.5