Print Report | Back to Sample Detail

Sample Record for 2018-02-22-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210828 DEA: 07290704 EFIS: 0712000076 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-47-0.9/2.0
Work Description: RESTORE BRIDGE SEISMIC.
Location Description:
Contractor Name: Golden State Bridge
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Thang Ton Structure Rep.: Noah Bruton

Sample Information

DIME Sample ID: 2018-02-22-13
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 02/22/2018
Date that the sample was received by the laboratory/organization performing the testing: 02/27/2018
The quantity of what the sample constitutes: 1721
A brief description of the sample: 7/8 A325 Bolts, nuts and washers
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CK Johnson Industries

Material Information

Rocap Number(s): 87C400BA30G, 87C325BA30G, 87C450BA30G, 87C250BA30G, 87C500BA30G, 87425BA30G, 87C525BA30G, 87C375BA30G, B7C475BA30G, 87C650BA30G
Heat Number(s): ,
Nut Mfg. Lot Number(s): 391903A
Washer Mfg. Lot Number(s): 321715
Bolt Specification: A325
Bolt Length(s): 4", 3.25", 4.5", 2.5", 5", 4.25", 5.25", 3.75
Nut Specification: 391903A
Washer Specification: F436
Finish: Galv
Diameter/Size: 7/8
Bolt Mfg. Lot Number: 402256A, 389327A, 398475A, 385211A, 399803A,
Rocap Test Requirement(s): Yes
Lubricant Requirements(s):

Test Results

Test 1 of 92

DIME Test ID: 2018-02-22-13-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/02/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1A402256A7/8\"64650287.610A325Brian
UTM 400KIP
Temperature no data

Test 2 of 92

DIME Test ID: 2018-02-22-13-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/02/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
2A389327A7/8\"65491291.310A325Brian
UTM 400KIP
Temperature no data

Test 3 of 92

DIME Test ID: 2018-02-22-13-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/02/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
3A398475A7/8\"6609629410A325Brian
UTM 400KIP
Temperature no data

Test 4 of 92

DIME Test ID: 2018-02-22-13-4
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/02/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
4A385211A7/8\"61443273.310A325Brian
UTM 400KIP
Temperature no data

Test 5 of 92

DIME Test ID: 2018-02-22-13-5
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/02/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
5A399803A7/8\"66615296.310A325Brian
UTM 400KIP
Temperature no data

Test 6 of 92

DIME Test ID: 2018-02-22-13-6
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
6A346522A7/8\"72253321.410A325Fred
UTM 400KIP
Temperature no data

Test 7 of 92

DIME Test ID: 2018-02-22-13-7
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
7A397523A7/8\"67495300.210A325Fred
UTM 400KIP
Temperature no data

Test 8 of 92

DIME Test ID: 2018-02-22-13-8
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
8A396604A7/8\"65960293.410A325Fred
UTM 400KIP
Temperature no data

Test 9 of 92

DIME Test ID: 2018-02-22-13-9
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
9A399508A7/8\"6587929310A325Fred
UTM 400KIP
Temperature no data

Test 10 of 92

DIME Test ID: 2018-02-22-13-10
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
10A381740A7/8\"67994302.510A325Fred
UTM 400KIP
Temperature no data

Test 11 of 92

DIME Test ID: 2018-02-22-13-11
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A391903A7/8\"71050316.05Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 12 of 92

DIME Test ID: 2018-02-22-13-12
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 03/06/2018
Date Tested: 03/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1B391903A7/8\"71106316.3Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 13 of 92

DIME Test ID: 2018-02-22-13-13
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 402256A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4 in
Gage Type Pass

Test 14 of 92

DIME Test ID: 2018-02-22-13-14
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 402256A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4 in
Gage Type Pass

Test 15 of 92

DIME Test ID: 2018-02-22-13-15
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 402256A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4 in
Gage Type Pass

Test 16 of 92

DIME Test ID: 2018-02-22-13-16
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 389327A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.250 in
Gage Type Pass

Test 17 of 92

DIME Test ID: 2018-02-22-13-17
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 389327A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.250 in
Gage Type Pass

Test 18 of 92

DIME Test ID: 2018-02-22-13-18
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 389327A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.250 in
Gage Type Pass

Test 19 of 92

DIME Test ID: 2018-02-22-13-19
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 398475A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Gage Type Pass

Test 20 of 92

DIME Test ID: 2018-02-22-13-20
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 398475A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Gage Type Pass

Test 21 of 92

DIME Test ID: 2018-02-22-13-21
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 398475A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Gage Type Pass

Test 22 of 92

DIME Test ID: 2018-02-22-13-22
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Gage Type Pass

Test 23 of 92

DIME Test ID: 2018-02-22-13-23
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Gage Type Pass

Test 24 of 92

DIME Test ID: 2018-02-22-13-24
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Gage Type Pass

Test 25 of 92

DIME Test ID: 2018-02-22-13-25
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Gage Type Pass

Test 26 of 92

DIME Test ID: 2018-02-22-13-26
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Gage Type Pass

Test 27 of 92

DIME Test ID: 2018-02-22-13-27
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399803A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5 in
Gage Type Pass

Test 28 of 92

DIME Test ID: 2018-02-22-13-28
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399803A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5 in
Gage Type Pass

Test 29 of 92

DIME Test ID: 2018-02-22-13-29
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399803A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5 in
Gage Type Pass

Test 30 of 92

DIME Test ID: 2018-02-22-13-30
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 3465225A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Gage Type Pass

Test 31 of 92

DIME Test ID: 2018-02-22-13-31
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 3465225A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Gage Type Pass

Test 32 of 92

DIME Test ID: 2018-02-22-13-32
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 3465225A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Gage Type Pass

Test 33 of 92

DIME Test ID: 2018-02-22-13-33
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 39752A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5.250 in
Gage Type Pass

Test 34 of 92

DIME Test ID: 2018-02-22-13-34
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 39752A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5.250 in
Gage Type Pass

Test 35 of 92

DIME Test ID: 2018-02-22-13-35
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 39752A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5.250 in
Gage Type Pass

Test 36 of 92

DIME Test ID: 2018-02-22-13-36
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 396604A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.75 in
Gage Type Pass

Test 37 of 92

DIME Test ID: 2018-02-22-13-37
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 396604A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.75 in
Gage Type Pass

Test 38 of 92

DIME Test ID: 2018-02-22-13-38
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 396604A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.75 in
Gage Type Pass

Test 39 of 92

DIME Test ID: 2018-02-22-13-39
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399508A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.75 in
Gage Type Pass

Test 40 of 92

DIME Test ID: 2018-02-22-13-40
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399508A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.75 in
Gage Type Pass

Test 41 of 92

DIME Test ID: 2018-02-22-13-41
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399508A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.75 in
Gage Type Pass

Test 42 of 92

DIME Test ID: 2018-02-22-13-42
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 381740A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 6.5 in
Gage Type Pass

Test 43 of 92

DIME Test ID: 2018-02-22-13-43
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 381740A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 6.5 in
Gage Type Pass

Test 44 of 92

DIME Test ID: 2018-02-22-13-44
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 381740A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 6.5 in
Gage Type Pass

Test 45 of 92

DIME Test ID: 2018-02-22-13-45
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 391903A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .875 in
Gage Type Pass

Test 46 of 92

DIME Test ID: 2018-02-22-13-46
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 391903A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .875 in
Gage Type Pass

Test 47 of 92

DIME Test ID: 2018-02-22-13-47
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 391903A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .875 in
Gage Type Pass

Test 48 of 92

DIME Test ID: 2018-02-22-13-48
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 391903A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .875 in
Gage Type Pass

Test 49 of 92

DIME Test ID: 2018-02-22-13-49
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 391903A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .875 in
Gage Type Pass

Test 50 of 92

DIME Test ID: 2018-02-22-13-50
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 3465225A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Measurement Average 3.69 mils

Test 51 of 92

DIME Test ID: 2018-02-22-13-51
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 3465225A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Measurement Average 4.59 mils

Test 52 of 92

DIME Test ID: 2018-02-22-13-52
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 3465225A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Measurement Average 4.34 mils

Test 53 of 92

DIME Test ID: 2018-02-22-13-53
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 39752A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5.250 in
Measurement Average 3.18 mils

Test 54 of 92

DIME Test ID: 2018-02-22-13-54
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 39752A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5.250 in
Measurement Average 4.03 mils

Test 55 of 92

DIME Test ID: 2018-02-22-13-55
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 39752A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5.250 in
Measurement Average 2.25 mils

Test 56 of 92

DIME Test ID: 2018-02-22-13-56
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 396604A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.75 in
Measurement Average 4.76 mils

Test 57 of 92

DIME Test ID: 2018-02-22-13-57
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 396604A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.75 in
Measurement Average 4.07 mils

Test 58 of 92

DIME Test ID: 2018-02-22-13-58
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 396604A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.75 in
Measurement Average 5.37 mils

Test 59 of 92

DIME Test ID: 2018-02-22-13-59
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399508A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.75 in
Measurement Average 3.97 mils

Test 60 of 92

DIME Test ID: 2018-02-22-13-60
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399508A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.75 in
Measurement Average 4.06 mils

Test 61 of 92

DIME Test ID: 2018-02-22-13-61
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399508A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.75 in
Measurement Average 3.58 mils

Test 62 of 92

DIME Test ID: 2018-02-22-13-62
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 381740A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 6.5 in
Measurement Average 3.33 mils

Test 63 of 92

DIME Test ID: 2018-02-22-13-63
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 381740A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 6.5 in
Measurement Average 3.29 mils

Test 64 of 92

DIME Test ID: 2018-02-22-13-64
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 381740A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 6.5 in
Measurement Average 2.71 mils

Test 65 of 92

DIME Test ID: 2018-02-22-13-65
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38.7
Spacing Ok

Test 66 of 92

DIME Test ID: 2018-02-22-13-66
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.15
Spacing Ok

Test 67 of 92

DIME Test ID: 2018-02-22-13-67
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 34.9
Spacing Ok

Test 68 of 92

DIME Test ID: 2018-02-22-13-68
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Measurement Average 4.1 mils

Test 69 of 92

DIME Test ID: 2018-02-22-13-69
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Measurement Average 4.29 mils

Test 70 of 92

DIME Test ID: 2018-02-22-13-70
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Measurement Average 3.53 mils

Test 71 of 92

DIME Test ID: 2018-02-22-13-71
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Measurement Average 3.5 mils

Test 72 of 92

DIME Test ID: 2018-02-22-13-72
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 321715
Finish Coating ASTM F2329 - Hot Dip
Product Markings B
Size .875 in
Bolt Length no data in
Measurement Average 4.6 mils

Test 73 of 92

DIME Test ID: 2018-02-22-13-73
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.3
Spacing Ok

Test 74 of 92

DIME Test ID: 2018-02-22-13-74
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.8
Spacing Ok

Test 75 of 92

DIME Test ID: 2018-02-22-13-75
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.5
Spacing Ok

Test 76 of 92

DIME Test ID: 2018-02-22-13-76
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 402256A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4 in
Measurement Average 4.02 mils

Test 77 of 92

DIME Test ID: 2018-02-22-13-77
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 402256A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4 in
Measurement Average 4.14 mils

Test 78 of 92

DIME Test ID: 2018-02-22-13-78
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 402256A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4 in
Measurement Average 3.5 mils

Test 79 of 92

DIME Test ID: 2018-02-22-13-79
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 389327A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.250 in
Measurement Average 2.99 mils

Test 80 of 92

DIME Test ID: 2018-02-22-13-80
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 389327A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.250 in
Measurement Average 3.41 mils

Test 81 of 92

DIME Test ID: 2018-02-22-13-81
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 389327A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 3.250 in
Measurement Average 4.68 mils

Test 82 of 92

DIME Test ID: 2018-02-22-13-82
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 398475
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Measurement Average 2.33 mils

Test 83 of 92

DIME Test ID: 2018-02-22-13-83
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 398475
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Measurement Average 2.65 mils

Test 84 of 92

DIME Test ID: 2018-02-22-13-84
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 398475
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 4.5 in
Measurement Average 2.16 mils

Test 85 of 92

DIME Test ID: 2018-02-22-13-85
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Measurement Average 2.58 mils

Test 86 of 92

DIME Test ID: 2018-02-22-13-86
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Measurement Average 2.28 mils

Test 87 of 92

DIME Test ID: 2018-02-22-13-87
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Measurement Average 3.39 mils

Test 88 of 92

DIME Test ID: 2018-02-22-13-88
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Measurement Average 3.21 mils

Test 89 of 92

DIME Test ID: 2018-02-22-13-89
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 385211A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 2.5 in
Measurement Average 3.3 mils

Test 90 of 92

DIME Test ID: 2018-02-22-13-90
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399803A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5 in
Measurement Average 3.29 mils

Test 91 of 92

DIME Test ID: 2018-02-22-13-91
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399803A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5 in
Measurement Average 3.68 mils

Test 92 of 92

DIME Test ID: 2018-02-22-13-92
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/06/2018
Date Tested: 03/06/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 399803A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size .875 in
Bolt Length 5 in
Measurement Average 6.09 mils