Print Report | Back to Test Summary

Testing Report for 2017-07-31-1-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 030G9404
EFIS: 0317000204
Project ID: 212572
QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-5,50-
Work Description: Remove MLS and 1" polyester concrete overlay on Pioneer Bridge in Sacramento, CA.
Location Description: Sacramento, CA
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: JEFF HAMM
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-07-31-1
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 7/31/2017
Date that the sample was received by the laboratory/organization performing the testing: 7/31/2017
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik bond and Reichhold

Material Information

Mfg. Lot Number(s): 1066689
Batch number: 1066689
Mix number: 1066689

Test Information

DIME Test ID: 2017-07-31-1-1
Test Method: CONCLP 3-16: Polyester Resin
Date Tested: 10/6/2017
Verified Date: 10/6/2017
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email:
Organization Phone: (916) 227-7283
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 86 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 55.8 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 3323 psi
Styrene ASTM D 2369 40% to 50 %: 46.1 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 515 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.5 grams