Print Report | Back to Sample Detail

Sample Record for 2017-07-27-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212572 DEA: 030G9404 EFIS: 0317000204 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC,YOL/SAC-5,50-2.4/L0.7
Work Description: Remove MLS and 1" polyester concrete overlay on Pioneer Bridge in Sacramento, CA.
Location Description: Sacramento, CA
Contractor Name: MYERS AND SONS CONSTRUCTION LP
Contractor Address: 600 NORTHGATE BLVD., STE 100, SACRAMENTO, CA 95834
Resident Engineer: JEFF HAMM Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-07-27-9
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 07/27/2017
Date that the sample was received by the laboratory/organization performing the testing: 07/27/2017
The quantity of what the sample constitutes: 25000 gal
A brief description of the sample: 2 pints 204,chp,zcure,8020
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: kwik Bond, Benecia

Material Information

Mfg. Lot Number(s): 1770389488
Batch number: 1770389488
Mix number: 1770389488
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2017-07-27-9-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 10/06/2017
Date Tested: 10/06/2017
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 20 cps
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.09
Volatile content (ASTM D 2369) 30% max 24 %
Flash point (ASTM D 3828) more than 180 deg F 220 F
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 595 psi
Tack free time, 400 minutes max 280 minutes