Print Report | Back to Sample Detail

Sample Record for 2017-09-15-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 211982 DEA: 060K4604 EFIS: 0612000105 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-46,99-57.3/57.8,43.9/44.6
Work Description: REALIGN ROADWAY AND CONSTRUCT NEW BRIDGE.
Location Description: KERN COUNTY NEAR FAMOSO ON ROUTE 46 FROM 0.5 MILE WEST OF ROUTE 46/99 SEPARATION TO 0.1 MILE EAST OF ROUTE 46/99 SEPARATION AND ON ROUTE 99 FROM 0.4 MILE SOUTH OF ROUTE 46/99 SEPARATION TO 0.3 MILE NORTH OF ROUTE 46/99 SEPARATION
Contractor Name: SEMA CONSTRUCTION
Contractor Address: 320 Goddard Way Suite 150, Irvine, CA 92618
Resident Engineer: Fernando De Alba Structure Rep.: Eduardo Reyes

Sample Information

DIME Sample ID: 2017-09-15-11
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 09/15/2017
Date that the sample was received by the laboratory/organization performing the testing: 09/20/2017
The quantity of what the sample constitutes: 5
A brief description of the sample: Plain Pads
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dynamic Rubber

Material Information

Mfg. Lot Number(s): CR55-006-17
Material/Compound/Elastomer ID: NA
Samples Representing: 15
Description (size): .5" X 12" X 26"
Comments: Unknown
Description (Number of Shims): NA
Type of Bearing Pad: Plain
Description (Thickness of Shims): NA
Manufacturer(s): Dynamic Rubber
Batch Number: NA

Test Results

Test 1 of 4

DIME Test ID: 2017-09-15-11-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 10/04/2017
Date Tested: 09/22/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 52
Reading #2 52
Reading #3 51
Reading #4 52
Reading #5 51
Mean 51.6

Test 2 of 4

DIME Test ID: 2017-09-15-11-2
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 10/04/2017
Date Tested: 09/22/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 5
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2KIP
Humidity 50 %
Temperature 72 F
Sample 1 Median Thickness 0.078 in
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 3025.6 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.076 in
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2157.9 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.083 in
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2788.5 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Sample 4 Median Thickness 0.08 in
Sample 4 Thickness all Within 0.003 inch? Yes
Sample 4 Ultimate Tensile 1750 lbf/in^2
Sample 4 Elongation (350% Min) Pass
Sample 5 Median Thickness 0.08 in
Sample 5 Thickness all Within 0.003 inch? Yes
Sample 5 Ultimate Tensile 2850 lbf/in^2
Sample 5 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2788.5 lbf/in^2

Test 3 of 4

DIME Test ID: 2017-09-15-11-3
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 10/04/2017
Date Tested: 09/22/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM no data
Humidity 50 %
Temperature 72 F
Sample 1 Median Thickness 0.088 in
Sample 1 Tear Strength 238.6 lbf / in
Sample 2 Median Thickness 0.07 in
Sample 2 Tear Strength 257.1 lbf / in
Sample 3 Median Thickness 0.074 in
Sample 3 Tear Strength 229.7 lbf / in
Median of the Tear Strength Values 238.6 lb/in

Test 4 of 4

DIME Test ID: 2017-09-15-11-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 10/04/2017
Date Tested: 10/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass