Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2017-09-14-10
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Stock
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/14/2017
Date that the sample was received by the laboratory/organization performing the testing: 09/20/2017
The quantity of what the sample constitutes: 5
A brief description of the sample: 1.5-6 x 4 HDG bolts
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hodell-Natco Union Metals
Rocap Number(s): 503104
Heat Number(s): 3068101
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325
Bolt Length(s): 4"
Nut Specification: N/A
Washer Specification: N/A
Finish: HDG
Diameter/Size: 1.5"
Bolt Mfg. Lot Number: 45337 770861
Rocap Test Requirement(s):
Lubricant Requirements(s):
DIME Test ID: 2017-09-14-10-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Gage Type
|
Pass
|
DIME Test ID: 2017-09-14-10-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Gage Type
|
Pass
|
DIME Test ID: 2017-09-14-10-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Gage Type
|
Pass
|
DIME Test ID: 2017-09-14-10-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1D
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Gage Type
|
Pass
|
DIME Test ID: 2017-09-14-10-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1E
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Gage Type
|
Pass
|
DIME Test ID: 2017-09-14-10-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Measurement Average
|
4.26 mils
|
DIME Test ID: 2017-09-14-10-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Measurement Average
|
5.12 mils
|
DIME Test ID: 2017-09-14-10-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Measurement Average
|
5.08 mils
|
DIME Test ID: 2017-09-14-10-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1D
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Measurement Average
|
4.81 mils
|
DIME Test ID: 2017-09-14-10-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1E
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Measurement Average
|
5.2 mils
|
DIME Test ID: 2017-09-14-10-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
26.87
|
Spacing
|
Ok
|
DIME Test ID: 2017-09-14-10-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
26.42
|
Spacing
|
Ok
|
DIME Test ID: 2017-09-14-10-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/21/2017
Date Tested: 09/21/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
45337
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A 325 G
|
Size
|
1.5 in
|
Bolt Length
|
4 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
26.22
|
Spacing
|
Ok
|