Print Report | Back to Test Summary

Testing Report for 2017-07-27-5-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 07302604
EFIS: 0713000483
Project ID: 211304
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-57-R4.4/R12.1
Work Description: REPLACE CONCRETE PAVEMENT, COLD PLANE AND PLACE HMA PAVEMENT.
Location Description: LOS ANGELES COUNTY FROM ROUTE 57/60 SEPARATION IN DIAMOND BAR TO ROUTE 57/210 SEPARATION IN GLENDORA
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Reda Karout
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-07-27-5
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT QASI - Los Angeles Field Laboratory
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 7/27/2017
Date that the sample was received by the laboratory/organization performing the testing: 7/28/2017
The quantity of what the sample constitutes: 2 6x12 cylinders
A brief description of the sample: 6x12 concrete cylinders
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier: Route 57 and 60 Pavement slabs
Structure name: Precast Pavement Slabs
The fabricator/manufacturer/facility name: Pro Cast Products

Material Information

The concrete mix design number: RRM-14062
The truck number from where the sample was collected: 14
The batch plant ticket number from where the sample was collected: 3056018
Concrete batch plant: Robertsons Ready Mix
The fabricator/manufacturer designation for the sample: Load 4
A detailed description of where the material sample was collected: Wheel Barrow from Chute
Where the material sample would have been placed if not sampled: Precast Pavement Slabs
From Lot No.: Load 4
Bag Lot No.: Unknown

Test Information

DIME Test ID: 2017-07-27-5-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Date Tested: 8/24/2017
Verified Date: 8/24/2017
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.03 in
Average diameter of cylinder 2: 6.01 in
Cross sectional area of cylinder 1: 28.56 in^2
Cross sectional area of cylinder 2: 28.37 in^2
Compressive strength (to nearest 10 psi): 6040 psi
Maximum load on cylinder 1: 172880 lb
Maximum load on cylinder 2: 171220 lb
Compressive strength of cylinder 1: 6053.2 psi
Type of fracture pattern of cylinder 1: 2
Compressive strength of cylinder 2: 6035.2 psi
Type of fracture pattern of cylinder 2: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: no data
Age of specimen: 28 days
Age of specimen in hours: no data