Sample Record for 2017-07-28-15
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 210580 DEA: 022E8004 EFIS: 0200000603
QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-5-R7.2
Work Description: RECONSTRUCTION OF THE DUNSMUIR COMMERCIAL VEHICLE ENFORCEMENT FACILITY
Location Description: IN SISKIYOU COUNTY NEAR DUNSMUIR ATDUNSMUIR GRADE COMMERCIAL VEHICLE ENFORCEMENT FACILITY.
Contractor Name: RANDY HILL CONSTRUCTION, INC
Contractor Address: 5237 Mallard Estates Rd., Chico, CA 95973
Resident Engineer: Nicole Mallory Structure Rep.: Andrew J (Andy) Osullivan
Sample Information
DIME Sample ID: 2017-07-28-15
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT - Unassigned/General Field Laboratory
Sample Organization Contact: 5625005861
Type of Sample: Acceptance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/28/2017
Date that the sample was received by the laboratory/organization performing the testing: 07/31/2017
The quantity of what the sample constitutes: 33
A brief description of the sample: F1554 anchor bolt
From where was the sample collected: Fabricator
Laboratory sample identification: S08-016-17
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BSMI
Material Information
Rocap Number(s):
Heat Number(s): 376816, 144917, 16205649
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: none
Bolt Length(s): 12'', 33'', 25-1/2''
Nut Specification: none
Washer Specification: none
Finish: plain
Diameter/Size: 3/4, 1''
Bolt Mfg. Lot Number:
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 9
DIME Test ID: 2017-07-28-15-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | 1 | 144917 | 0.498 | 0.195 | 58181 | 78360 | 30.9 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 f
|
Test 2 of 9
DIME Test ID: 2017-07-28-15-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | 2 | 144917 | 0.497 | 0.194 | 56576 | 77850 | 32.9 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 f
|
Test 3 of 9
DIME Test ID: 2017-07-28-15-3
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | 3 | PL16205649 | 0.498 | 0.195 | 57782 | 79960 | 31.9 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 f
|
Test 4 of 9
DIME Test ID: 2017-07-28-15-4
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | 4 | PL16205649 | 0.499 | 0.196 | 58990 | 80390 | 31.9 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 f
|
Test 5 of 9
DIME Test ID: 2017-07-28-15-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
376816
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE PAINT
|
Size
|
.750 in
|
Bolt Length
|
12 in
|
Gage Type
|
Fail (No Go)
|
Test 6 of 9
DIME Test ID: 2017-07-28-15-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2A
|
Rocap Number
|
no data
|
Heat Number(s)
|
144917
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE PAINT
|
Size
|
1 in
|
Bolt Length
|
33 in
|
Gage Type
|
Pass
|
Test 7 of 9
DIME Test ID: 2017-07-28-15-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2B
|
Rocap Number
|
no data
|
Heat Number(s)
|
144917
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE PAINT
|
Size
|
1 in
|
Bolt Length
|
33 in
|
Gage Type
|
Pass
|
Test 8 of 9
DIME Test ID: 2017-07-28-15-8
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2C
|
Rocap Number
|
no data
|
Heat Number(s)
|
144917
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE PAINT
|
Size
|
1 in
|
Bolt Length
|
33 in
|
Gage Type
|
Pass
|
Test 9 of 9
DIME Test ID: 2017-07-28-15-9
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/04/2017
Date Tested: 08/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
no data
|
Heat Number(s)
|
PL16205649
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE PAINT
|
Size
|
1 in
|
Bolt Length
|
25 in
|
Gage Type
|
Pass
|