Print Report | Back to Test Summary

Testing Report for 2017-04-21-7-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 59912684
EFIS:
Project ID: 8196
QA Service Level: 1
DIST-CO-RTE-PM: 59---
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-04-21-7
TL Number from the TL Form: C953706
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 4/21/2017
Date that the sample was received by the laboratory/organization performing the testing: 4/26/2017
The quantity of what the sample constitutes: 12
A brief description of the sample: F1554 Grade 55 HDG Anchor Bolts
From where was the sample collected: Distributor
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Circle

Material Information

Rocap Number(s):
Heat Number(s): PL16101305 266716 275015
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: F1554 Gr 55
Bolt Length(s): 12, 31, 30, 24
Nut Specification: NA
Washer Specification: NA
Finish: F2329
Diameter/Size: 1-1/4, 1, 3/4,
Bolt Mfg. Lot Number:
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Information

DIME Test ID: 2017-04-21-7-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Date Tested: 4/28/2017
Verified Date: 5/4/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Number of Samples: 8
Sample Heat Number Diameter (in) Area (sqin) Stress at Offset (psi) Tensile Strength (psi) Elongation in 4 x d (%) Tested By
PL16101305 0.499 0.1956 60961 82550 28.7 Brian
PL16101305 0.499 0.1956 59782 82690 28.4 Brian
266716 0.499 0.1956 64337 83680 29.7 Brian
266716 0.502 0.1979 65614 84380 27.4 Brian
275015 0.35 0.0962 68222 88890 28.1 Brian
275015 0.349 0.0957 74516 91270 27.4 Brian
275015 0.35 0.0962 69691 89120 28.1 Brian
275015 0.351 0.0968 71591 89180 28.9 Brian
UTM: 67KIP
Temperature: 72 F