Print Report | Back to Sample Detail

Sample Record for 2017-03-28-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210041 DEA: 043G4864 EFIS: 0412000086 QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-92-14.4/18.8
Work Description: CLEAN AND PAINT STRUCTURAL STEEL ON BRIDGE
Location Description: IN SAN MATEO AND ALAMEDA COUNTIES ON ROUTE 92 AT SAN MATEO HAYWARD
Contractor Name: LIBERTY MAINTENANCE, INC.
Contractor Address: 777 N. Meridian Rd., Youngstown, OH 44509
Resident Engineer: Minh Hinh Structure Rep.: Bryan Chew

Sample Information

DIME Sample ID: 2017-03-28-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/28/2017
Date that the sample was received by the laboratory/organization performing the testing: 03/30/2017
The quantity of what the sample constitutes: 125
A brief description of the sample: 1-8 x 3 Heavy Hex bolt
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Pacific Bolt

Material Information

Rocap Number(s): L1412021
Heat Number(s): 1444030 166642 11606780
Nut Mfg. Lot Number(s): 24618-166642
Washer Mfg. Lot Number(s): D2553
Bolt Specification: A325
Bolt Length(s): 3"
Nut Specification: A563 DH
Washer Specification: F436
Finish: Mech Galv
Diameter/Size: 1"
Bolt Mfg. Lot Number: 773938
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 16

DIME Test ID: 2017-03-28-1-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/04/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1AB362018171\"88553393.910A325Fred
UTM 400KIP
Temperature no data

Test 2 of 16

DIME Test ID: 2017-03-28-1-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 04/04/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1AB362018171\"92886413.18Fred
UTM 400KIP
Temperature 72 F

Test 3 of 16

DIME Test ID: 2017-03-28-1-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/04/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Test Temperature (F) 72 °F
Sample No. 1A
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 773938
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 LE USA
Size 1 in
Bolt Length 3 in
Gage Type Pass

Test 4 of 16

DIME Test ID: 2017-03-28-1-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Test Temperature (F) 72 °F
Sample No. 1B
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 773938
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 LE USA
Size 1 in
Bolt Length 3 in
Measurement Average 3.26 mils

Test 5 of 16

DIME Test ID: 2017-03-28-1-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 773938
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 LE USA
Size 1 in
Bolt Length 3 in
Gage Type Pass

Test 6 of 16

DIME Test ID: 2017-03-28-1-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 773938
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 LE USA
Size 1 in
Bolt Length 3 in
Gage Type Pass

Test 7 of 16

DIME Test ID: 2017-03-28-1-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 773938
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 LE USA
Size 1 in
Bolt Length 3 in
Measurement Average 3.79 mils

Test 8 of 16

DIME Test ID: 2017-03-28-1-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 773938
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 LE USA
Size 1 in
Bolt Length 3 in
Measurement Average 4.18 mils

Test 9 of 16

DIME Test ID: 2017-03-28-1-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 24618-166642Z
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Bolt Length no data in
Measurement Average 2.96 mils

Test 10 of 16

DIME Test ID: 2017-03-28-1-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 24618-166642Z
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Bolt Length no data in
Measurement Average 3.26 mils

Test 11 of 16

DIME Test ID: 2017-03-28-1-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number 24618-166642Z
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Bolt Length no data in
Measurement Average 3.14 mils

Test 12 of 16

DIME Test ID: 2017-03-28-1-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number D2553
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Measurement Average 3.54 mils

Test 13 of 16

DIME Test ID: 2017-03-28-1-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number D2553
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Measurement Average 3.8 mils

Test 14 of 16

DIME Test ID: 2017-03-28-1-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number D2553
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Measurement Average 3.71 mils

Test 15 of 16

DIME Test ID: 2017-03-28-1-16
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number D2553
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40
Spacing Ok

Test 16 of 16

DIME Test ID: 2017-03-28-1-17
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/04/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number L1412021
Heat Number(s) no data
Mfg. Lot Number D2553
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 4045
Spacing Ok

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2017-03-28-1-5ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)04/04/201704/03/2017Fred SaylorCT HQ - Sacramento Structural Materials Testing LaboratoryFred Saylor