Print Report | Back to Test Summary

Testing Report for 2017-03-06-10-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 042A4904
EFIS: 0400000827
Project ID: 211736
QA Service Level: 1
DIST-CO-RTE-PM: 04-SF-280-R4.8/R6.2
Work Description: BRIDGE POLYESTER CONCRETE OVERLAY, DRAINAGE AND BARRIER RECONSTRUCTION
Location Description: THE CITY AND COUNTY OF SAN FRANCISCO AT VARIOUS LOCATIONS FROM 0.5 MILE NORTH OF ROUTE 280/101 SEPARATION TO 0.2 MILE SOUTH OF 20TH STREET OVERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Jose David
Structure Rep.: Peter Lam

Sample Information

DIME Sample ID: 2017-03-06-10
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 3/6/2017
Date that the sample was received by the laboratory/organization performing the testing: 3/8/2017
The quantity of what the sample constitutes: 80 drums and 16 totes
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: reichhold azusa

Material Information

Mfg. Lot Number(s): 1035530
Batch number: 1035530
Mix number: 3228

Test Information

DIME Test ID: 2017-03-06-10-1
Test Method: CONCLP 3-16: Polyester Resin
Date Tested: 3/21/2017
Verified Date: 5/25/2017
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 124 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 52.9 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2855 psi
Styrene ASTM D 2369 40% to 50 %: 45.8 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 485 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.5 grams