Print Report | Back to Sample Detail

Sample Record for 2017-03-15-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 8196 DEA: 59912684 QA Service Level: 1
DIST-CO-RTE-PM: 59---
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-03-15-3
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/15/2017
Date that the sample was received by the laboratory/organization performing the testing: 03/15/2017
The quantity of what the sample constitutes: 9
A brief description of the sample: A325 HDG Rocap Assembiy
From where was the sample collected: Distributor
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hodell-Natco Nucor Prestige

Material Information

Rocap Number(s): 3263-031417
Heat Number(s):
Nut Mfg. Lot Number(s): 375883A
Washer Mfg. Lot Number(s): D3205
Bolt Specification: A325
Bolt Length(s): 5.5
Nut Specification: A563
Washer Specification: F436
Finish: HDG
Diameter/Size: 1
Bolt Mfg. Lot Number: 366321A
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 16

DIME Test ID: 2017-03-15-3-1
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number 3263-031417
Heat Number(s) NF15102094
Mfg. Lot Number 366321A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size 1 in
Bolt Length 5.5 in
Pitch Diameter 0.9199 in
Pitch Diameter 2nd no data

Test 2 of 16

DIME Test ID: 2017-03-15-3-2
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number 3263-031417
Heat Number(s) NF15102094
Mfg. Lot Number 366321A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size 1 in
Bolt Length 5.5 in
Pitch Diameter 0.9310 in
Pitch Diameter 2nd no data

Test 3 of 16

DIME Test ID: 2017-03-15-3-3
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number 3263-031417
Heat Number(s) NF15102094
Mfg. Lot Number 366321A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size 1 in
Bolt Length 5.5 in
Pitch Diameter 0.9395 in
Pitch Diameter 2nd no data

Test 4 of 16

DIME Test ID: 2017-03-15-3-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number 3263-031417
Heat Number(s) NF15102094
Mfg. Lot Number 366321A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size 1 in
Bolt Length 5.5 in
Measurement Average 2.95 mils

Test 5 of 16

DIME Test ID: 2017-03-15-3-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number 3263-031417
Heat Number(s) NF15102094
Mfg. Lot Number 366321A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size 1 in
Bolt Length 5.5 in
Measurement Average 2.7 mils

Test 6 of 16

DIME Test ID: 2017-03-15-3-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number 3263-031417
Heat Number(s) NF15102094
Mfg. Lot Number 366321A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 N
Size 1 in
Bolt Length 5.5 in
Measurement Average 4.62 mils

Test 7 of 16

DIME Test ID: 2017-03-15-3-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number 3263-031417
Heat Number(s) DL16101605
Mfg. Lot Number 375883A
Finish Coating ASTM F2329 - Hot Dip
Product Markings HD N
Size 1 in
Bolt Length no data in
Measurement Average 2.68 mils

Test 8 of 16

DIME Test ID: 2017-03-15-3-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number 3263-031417
Heat Number(s) DL16101605
Mfg. Lot Number 375883A
Finish Coating ASTM F2329 - Hot Dip
Product Markings HD N
Size 1 in
Bolt Length no data in
Measurement Average 4.47 mils

Test 9 of 16

DIME Test ID: 2017-03-15-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number 3263-031417
Heat Number(s) DL16101605
Mfg. Lot Number 375883A
Finish Coating ASTM F2329 - Hot Dip
Product Markings HD N
Size 1 in
Bolt Length no data in
Measurement Average 4.21 mils

Test 10 of 16

DIME Test ID: 2017-03-15-3-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number 3263-031417
Heat Number(s) 812S35090
Mfg. Lot Number D3205
Finish Coating ASTM F2329 - Hot Dip
Product Markings P436 P
Size 1 in
Bolt Length no data in
Measurement Average 5.23 mils

Test 11 of 16

DIME Test ID: 2017-03-15-3-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number 3263-031417
Heat Number(s) 812S35090
Mfg. Lot Number D3205
Finish Coating ASTM F2329 - Hot Dip
Product Markings P436 P
Size 1 in
Bolt Length no data in
Measurement Average 5.12 mils

Test 12 of 16

DIME Test ID: 2017-03-15-3-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number 3263-031417
Heat Number(s) 812S35090
Mfg. Lot Number D3205
Finish Coating ASTM F2329 - Hot Dip
Product Markings P436 P
Size 1 in
Bolt Length no data in
Measurement Average 6.67 mils

Test 13 of 16

DIME Test ID: 2017-03-15-3-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number 3263-031417
Heat Number(s) 812S35090
Mfg. Lot Number D3205
Finish Coating ASTM F2329 - Hot Dip
Product Markings P436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 35.5
Spacing no data

Test 14 of 16

DIME Test ID: 2017-03-15-3-14
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number 3263-031417
Heat Number(s) 812S35090
Mfg. Lot Number D3205
Finish Coating ASTM F2329 - Hot Dip
Product Markings P436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 33.3
Spacing no data

Test 15 of 16

DIME Test ID: 2017-03-15-3-15
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A375883A1\"94107418.61Arnold
UTM 400KIP
Temperature 71 F

Test 16 of 16

DIME Test ID: 2017-03-15-3-16
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 03/21/2017
Date Tested: 03/20/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A366321A1\"90123400.9A325Arnold
UTM 400KIP
Temperature 71 F