Print Report | Back to Sample Detail

Sample Record for 2016-05-16-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 7285 DEA: 040120T4 EFIS: 0400000027 QA Service Level: 1
DIST-CO-RTE-PM: 04-SF-80-12.6/13.9
Work Description: CONSTRUCT BRIDGE, ROADWAYS, ELECTRICAL, BUILDINGS AND REMOVE BRIDGES
Location Description: THE CITY AND COUNTY OF SAN FRANCISCO FROM THE YERBA BUENA TUNNEL TO 1.3 KM EAST OF THE YERBA BUENA TUNNEL
Contractor Name: CALIFORNIA ENGINEERING CONTRACTORS, INC.
Contractor Address: 20 HAPPY VALLEY ROAD, PLEASANTON, CA 94566
Resident Engineer: Tom Larwin Structure Rep.: Mehran Ardakanian

Sample Information

DIME Sample ID: 2016-05-16-1
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT D04 - Oakland (YBITS II) 171 Burma Road Field Laboratory
Sample Organization Contact: (510) 286-0510
Type of Sample: Verification
Type of Material: Cementitious
Sample Taken Date: 05/16/2016
Date that the sample was received by the laboratory/organization performing the testing: 05/13/2016
The quantity of what the sample constitutes: 4 Bags
A brief description of the sample: Grout Material
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Quickcrete

Material Information

Brand: Quickcrete
Mill: Unknown
Type of Cementitious Material: Type III Cement
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2016-05-16-1-1
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 05/20/2016
Date Tested: 05/18/2016
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no data
Compressive strength of 1st specimen (psi) 6644 psi
Compressive strength of 2nd specimen (psi) 6592 psi
Compressive strength of 3rd specimen (psi) 5976 psi
Average Compressive strength (to nearest 10 psi) 6400 psi

Test 2 of 4

DIME Test ID: 2016-05-16-1-2
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 05/20/2016
Date Tested: 05/20/2016
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no data
Compressive strength of 1st specimen (psi) 7757 psi
Compressive strength of 2nd specimen (psi) 7525 psi
Compressive strength of 3rd specimen (psi) 7937 psi
Average Compressive strength (to nearest 10 psi) 7740 psi

Test 3 of 4

DIME Test ID: 2016-05-16-1-3
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 05/24/2016
Date Tested: 05/24/2016
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no data
Compressive strength of 1st specimen (psi) 9208 psi
Compressive strength of 2nd specimen (psi) 9501 psi
Compressive strength of 3rd specimen (psi) 9830 psi
Average Compressive strength (to nearest 10 psi) 9510 psi

Test 4 of 4

DIME Test ID: 2016-05-16-1-4
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 06/14/2016
Date Tested: 06/14/2016
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no data
Compressive strength of 1st specimen (psi) 9434 psi
Compressive strength of 2nd specimen (psi) 11000 psi
Compressive strength of 3rd specimen (psi) 11020 psi
Average Compressive strength (to nearest 10 psi) 10480 psi