Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 208967 DEA: 110223U4 EFIS: 1112000102
QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-5,89-R29.1/R30.5
Work Description: REPLACE AND WIDEN BRIDGE, RECONSTRUCT RAMPS AND INTERSECTION.
Location Description: SAN DIEGO COUNTY IN SAN DIEGO FROM 0.4 MILE SOUTH OF GENESEE AVENUE OVERCROSSING TO SORRENTO VIADUCT
Contractor Name: Flatiron
Contractor Address: 1770 LA COSTA MEADOWS DRIVE, SAN MARCOS CA 92078
Resident Engineer: Dave Pound Structure Rep.: Anh Ma
DIME Sample ID: 2016-02-10-4
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Ductile Iron Cast Samples
Sample Taken Date: 02/10/2016
Date that the sample was received by the laboratory/organization performing the testing: 02/12/2016
The quantity of what the sample constitutes: 6
A brief description of the sample: Coupon Casting
From where was the sample collected: Distributor
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BCI
Heat Number (s): 01186, 01196, 01206
Part Number (s): 6827216246
Material Specification: A536
Grades: 65-45-12
Metal Foundry Manufacturer (Mill): BCI
Prestressing Manufacturer: DSI
DIME Test ID: 2016-02-10-4-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 02/22/2016
Date Tested: 02/17/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: All samples failed - Low elongation.
Test Result Compliance: does not comply
Additional Comments When Verified:
Number of Samples
|
6
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 01186 | 0.493 | 0.1909 | 61052 | 103380 | 9 | Fred | | 01186 | 0.5 | 0.1963 | 60347 | 102240 | 9 | Fred | | 01196 | 0.495 | 0.1924 | 54229 | 87430 | 9.7 | Fred | | 01196 | 0.494 | 0.1917 | 57134 | 91530 | 8.9 | Fred | | 01206 | 0.5 | 0.1963 | 60433 | 102410 | 11 | Fred | | 01206 | 0.495 | 0.1924 | 63681 | 106140 | 7.9 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 F
|