Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 209795 DEA: 08383504 EFIS: 0800000638
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-63.0
Work Description: REPLACE HURKEY CREEK BRIDGE
Location Description: RIVERSIDE COUNTY NEAR IDYLLWILD AT HURKEY CREEK BRIDGE
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 440 SOUTH MELROSE DRIVE 200 , VISTA CA 92081
Resident Engineer: Max Quach Structure Rep.: Shukri Abouazra
DIME Sample ID: 2015-11-24-8
TL Number from the TL Form: 002
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 11/24/2015
Date that the sample was received by the laboratory/organization performing the testing: 12/01/2015
The quantity of what the sample constitutes: 2
A brief description of the sample: 6x12
From where was the sample collected: Job Site
Laboratory sample identification: 918-02
Structure unique identifier: hurkey bridge
Structure name: abutment 2 footing
The fabricator/manufacturer/facility name: np
The concrete mix design number: RRM09014
The truck number from where the sample was collected: 1772
The batch plant ticket number from where the sample was collected: 14398943
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: chute
Where the material sample would have been placed if not sampled: Unknown
From Lot No.:
Bag Lot No.:
DIME Test ID: 2015-11-24-8-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 12/22/2015
Date Tested: 12/22/2015
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used?
|
US Units
|
Number of specimens
|
2
|
Test performed
|
With no density determined
|
Capped in accordance with?
|
ASTM C617/CTM521
|
Average diameter of cylinder 1
|
5.97 in
|
Average diameter of cylinder 2
|
5.97 in
|
Cross sectional area of cylinder 1
|
27.99 in^2
|
Cross sectional area of cylinder 2
|
27.99 in^2
|
Compressive strength (to nearest 10 psi)
|
4110 psi
|
Maximum load on cylinder 1
|
114490 lb
|
Maximum load on cylinder 2
|
115370 lb
|
Compressive strength of cylinder 1
|
4090.4 psi
|
Type of fracture pattern of cylinder 1
|
3
|
Compressive strength of cylinder 2
|
4121.8 psi
|
Type of fracture pattern of cylinder 2
|
1
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Correction factor for cylinder 1
|
1
|
Correction factor for cylinder 2
|
no data
|
Age of specimen
|
28 days
|
Age of specimen in hours
|
no data
|