Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 209950 DEA: 080N56U4 EFIS: 0813000176
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-40-R94.7/R99.7
Work Description: BRIDGE REPLACEMENTS.
Location Description: SAN BERNARDINO COUNTY NEAR ESSEX AT HALLER WASH BRIDGE AT ROJO WASH BRIDGE AND AT CLIPPER VALLEY WASH BRIDGE
Contractor Name: OHL USA, INC.
Contractor Address: 1920 MAIN STREET STE 310, Irvine, CA 92614
Resident Engineer: Darcy Davis Structure Rep.: Leonard Romero
DIME Sample ID: 2015-10-26-5
TL Number from the TL Form: 12345678
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 10/26/2015
Date that the sample was received by the laboratory/organization performing the testing: 10/26/2015
The quantity of what the sample constitutes: 4
A brief description of the sample: 6X12
From where was the sample collected: Job Site
Laboratory sample identification: 907-78
Structure unique identifier: CLIPPER WASH BRIDGE RIGHT
Structure name: ABUT 1 FTG PIER2 AND 3 FTGS
The fabricator/manufacturer/facility name: ROBERTSONS
The concrete mix design number: RRM15027
The truck number from where the sample was collected: 1711
The batch plant ticket number from where the sample was collected: 1308946
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: LOAD 14
Where the material sample would have been placed if not sampled: Unknown
From Lot No.:
Bag Lot No.:
DIME Test ID: 2015-10-26-5-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 11/23/2015
Date Tested: 11/23/2015
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
4
|
|
Test performed
|
With no density determined
|
|
Capped in accordance with?
|
ASTM C617/CTM521
|
|
Average diameter of cylinder 1
|
5.98 in
|
|
Average diameter of cylinder 2
|
5.98 in
|
|
Average diameter of cylinder 3
|
5.98 in
|
|
Average diameter of cylinder 4
|
5.98 in
|
|
Cross sectional area of cylinder 1
|
28.09 in^2
|
|
Cross sectional area of cylinder 2
|
28.09 in^2
|
|
Cross sectional area of cylinder 3
|
28.09 in^2
|
|
Cross sectional area of cylinder 4
|
28.09 in^2
|
|
Compressive strength (to nearest 10 psi)
|
4820 psi
|
|
Maximum load on cylinder 1
|
143600 lb
|
|
Maximum load on cylinder 2
|
133220 lb
|
|
Maximum load on cylinder 3
|
126630 lb
|
|
Maximum load on cylinder 4
|
137940 lb
|
|
Compressive strength of cylinder 1
|
5112.1 psi
|
|
Type of fracture pattern of cylinder 1
|
2
|
|
Compressive strength of cylinder 2
|
4742.6 psi
|
|
Compressive strength of cylinder 3
|
4508 psi
|
|
Compressive strength of cylinder 4
|
4910.6 psi
|
|
Type of fracture pattern of cylinder 2
|
1
|
|
Type of fracture pattern of cylinder 3
|
1
|
|
Type of fracture pattern of cylinder 4
|
2
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1
|
|
Correction factor for cylinder 2
|
no data
|
|
Correction factor for cylinder 3
|
no data
|
|
Correction factor for cylinder 4
|
no data
|
|
Age of specimen
|
28 days
|
|
Age of specimen in hours
|
no data
|
