Print Report | Back to Test Summary

Testing Report for 2021-09-24-21-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-09-24-21
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Ductile Iron Cast Samples
Sample Taken Date: 9/24/2021
Date that the sample was received by the laboratory/organization performing the testing: 9/29/2021
The quantity of what the sample constitutes: 8
A brief description of the sample: Coupon Casting
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SDI Farrar

Material Information

Heat Number (s): D211 E121 F291 G081 G221 H121 H181 H261
Part Number (s): 19 6 AH 27 6 AH 1 75 BP 1 75
Material Specification: A536
Grades: 80-55-06
Metal Foundry Manufacturer (Mill): Farrar Corporation
Prestressing Manufacturer: SDI

Test Information

DIME Test ID: 2021-09-24-21-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Date Tested: 9/30/2021
Verified Date: 10/4/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Number of Samples: 8
Sample Heat Number Diameter (in) Area (sqin) Stress at Offset (psi) Tensile Strength (psi) Elongation in 4 x d (%) Tested By
D211 0.502 0.19792 61500 105538 8.6 fsaylor
E121 0.502 0.19792 61406 107046 10.5 fsaylor
F291 0.502 0.19792 61713 105452 9.2 fsaylor
G081 0.502 0.19792 64491 110241 9.9 fsaylor
G221 0.502 0.19792 63558 111921 9.9 fsaylor
H121 0.503 0.19871 63651 106875 7.7 fsaylor
H181 0.502 0.19792 64448 112855 9.1 fsaylor
H261 0.503 0.19871 65212 114361 7.9 fsaylor
UTM: 67kip
Temperature: 72 F