Print Report | Back to Sample Detail

Sample Record for 2021-08-31-29

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215773 DEA: 010F5004 EFIS: 0116000014 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM,HUM-29,36,211-VAR
Work Description: 4 BRIDGES DECK PRESERVATION.
Location Description: LAKE AND HUMBOLDT COUNTIES AT VARIOUS LOCATIONS
Contractor Name: AMERICAN CIVIL CONSTRUCTORS WEST COAST LLC
Contractor Address: 2990 Bay Vista Court Suite D, Benicia, CA 94510
Resident Engineer: Tai Morgan-Marbet Structure Rep.: Mike McCracken

Sample Information

DIME Sample ID: 2021-08-31-29
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 08/31/2021
Date that the sample was received by the laboratory/organization performing the testing: 08/31/2021
The quantity of what the sample constitutes: 60 Drums
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers

Material Information

Mfg. Lot Number(s): 1350992
Batch number: 1350992
Mix number: 1350992

Test Results

Test 1 of 6

DIME Test ID: 2021-08-31-29-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 09/17/2021
Date Tested: 09/17/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 91

Test 2 of 6

DIME Test ID: 2021-08-31-29-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 09/17/2021
Date Tested: 09/17/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Based on Supplier Results.
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 5
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.5 in
Sample 1 Ultimate strength 2622.8 psi
Sample 1 Thickness 0.257 in
Sample 1 Area 0.1285 in^2
Sample 1 Ultimate Strength Actual 337.03 lbs
Sample 1 percent elongation 62.9 %
Sample 1 Time 0 MM:SS
Sample 2 Width 0.45 in
Sample 2 Thickness 0.254 in
Sample 2 Area 0.1143 in^2
Sample 2 Ultimate strength 2542.2 psi
Sample 2 Ultimate Strength Actual 290.573 lbs
Sample 2 percent elongation 49.5 %
Sample 2 Time 0 MM:SS
Sample 3 Width 0.5 in
Sample 3 Thickness 0.253 in
Sample 3 Area 0.1265 in^2
Sample 3 Ultimate strength 2631.8 psi
Sample 3 Ultimate Strength Actual 332.923 lbs
Sample 3 percent elongation 62.1 %
Sample 3 Time 0 MM:SS
Sample 4 Width 0.253 in
Sample 4 Thickness 0.5 in
Sample 4 Area 0.1265 in^2
Sample 4 Ultimate strength 2966.5 psi
Sample 4 Ultimate Strength Actual 375.262 lbs
Sample 4 percent elongation 67.5 %
Sample 4 Time 0 MM:SS
Sample 5 Width 0.25 in
Sample 5 Thickness 0.5 in
Sample 5 Area 0.125 in^2
Sample 5 Ultimate strength 2549.4 psi
Sample 5 Ultimate Strength Actual 318.675 lbs
Sample 5 percent elongation 54.5 %
Sample 5 Time 0 MM:SS
Ultimate Strength Average 2663 psi
Percent Elongation Average 59 %

Test 3 of 6

DIME Test ID: 2021-08-31-29-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 09/17/2021
Date Tested: 09/17/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Based on Supplier Results.
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 45.8

Test 4 of 6

DIME Test ID: 2021-08-31-29-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 09/17/2021
Date Tested: 09/17/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Based on Supplier Results.
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1685.23 lb
Span length for Sample 1 9 in
Break location for Sample 1 PCC
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 842.615 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 1377.28 lb
Span length for Sample 2 9 in
Break location for Sample 2 PCC
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 688.64 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1351.49 lb
Span length for Sample 3 9 in
Break location for Sample 3 PCC
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 675.745 psi

Test 5 of 6

DIME Test ID: 2021-08-31-29-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 09/17/2021
Date Tested: 09/17/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Based on Supplier Results.
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 75 f
Tare weight 0 grams
Initial weight 100 grams
Weight at 5 minutes 99.911 grams
Weight at 10 minutes 99.825 grams
Weight at 15 minutes 99.745 grams
Weight at 20 minutes 99.652 grams
Weight at 25 minutes 99.561 grams
Weight at 30 minutes 99.483 grams
Final weight 99.48 grams
Total weight loss 0.52 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 27.954 grams/m^2

Test 6 of 6

DIME Test ID: 2021-08-31-29-7
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 09/17/2021
Date Tested: 09/17/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 8.9964